cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
5959
Views
5
Helpful
6
Replies

VRF not supported in 3650

Hi Guys,

need help and suggestion

I am trying to using VRF for my company on serveal 3650 switches, after I input " ip vrf vpn1" command, the system pop up as " the feature does not supported "

I am using a WS-C3650-24TD-S IP BASE switch with Image: CAT3K_CAA-UNIVERSALK9 Version:16.3.5b

1 ACCEPTED SOLUTION

Accepted Solutions

the solution was the commands below:

license right-to-use activate ipservices all
license right-to-use activate ipservices all acceptEULA

View solution in original post

6 REPLIES 6
Reza Sharifi
Hall of Fame Expert

Hi,

IP Base license does not support VRF.  You need to purchase and install "IP Services" license before you can use VRF.

HTH

What is the firmware correct ?

the solution was the commands below:

license right-to-use activate ipservices all
license right-to-use activate ipservices all acceptEULA

View solution in original post

That is the solution but if you have not purchased the "IP services license" Cisco will not support it.

 

par-3650-core#sh license right-to-use
Slot# License Name Type Count Period left
-------------------------------------------------------
1 ipservices permanet N/A Lifetime
2 ipbase permanent N/A Lifetime

License Level on Reboot: ipservices

soono
Cisco Employee

*Release Notes for Cisco Catalyst 3650 Series Switches, Cisco IOS XE Everest 16.5.1a
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16-5/release_notes/ol-16-5-3650.html#pgfId-1368336
>Whats New in Cisco IOS XE Everest 16.5.1a
3 VRF
Starting with this release, the 3 VRF feature is available at the IP Base license level.
It was previously available only at the IP Services license level.
(IP Base and IP Services)