cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3757
Views
0
Helpful
4
Replies

VS-S720-10G-3C compatibility

jsblendorio
Level 1
Level 1

Hello,

I need to know if the WS-C6509-V-E chassis with VS-S720-10G-3C supervisor is compatible with the following linecards

WS-X6148-GE-45AF

WS-X6148A-GE-45AF

WS-X6748-GE-TX with WS-F6700-DFC3B

WS-X6748-GE-TX with WS-F6700-DFC3A

It's difficult to find this information.  I know all these cards are compatible with the chassis.  It is just the cross compatibility between the linecards and the supervisor that I cannot seem to find anywhere on Cisco.com.

Thank you.

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

The first 2 cards are POE.  POE cards are not comparable with VSS.

As for the 3rd and 4th card.  You need cards with 3C or 3C-XL.

see table-1 in this link:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/prod_qas0900aecd806ed74b.html

HTH

So the 6148's will work without VSS?  If so, is it ok to mix these cards with cards that are 3C within the same chassis or will a single 6148 being present act to limit VSS functionality on the entire chassis?

Thanks!

Correct, if none VSS, 6148 will work. If you enable VSS and inset the 6148 card into the chassis, the line card will not go on line.  It doesn't effect the entire functionality of VSS.  Just the card does not work.

HTH

Thanks again.  I have one final question. So the 6748's will power on as well if VSS is disabled? Can the daugher board on the WS-X6748-GE-TX be upgraded from the 3A or 3B to WS-F6700-DFC3C or is it necessary to purchase new linecards?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: