cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
81
Views
0
Helpful
1
Replies
Highlighted
Beginner

VSS - Entre 6513 e 6513E

VSS - Entre 6513 e 6513E

 

Olá pessoal,

gostaria de saber se é possível fazer VSS entre esses 2 Chassis acima descritos:

no chassi atual (6513-E) eu tenho as seguintes:

Mod Ports Card Type                              Model              S
--- ----- -------------------------------------- ------------------ -----------
  1   16  CEF720 16 port 10GE                                  WS-X6816-10GE     
  2   16  CEF720 16 port 10GE                                  WS-X6816-10GE     
  3   24  CEF720 24 port 1000mb SFP                      WS-X6824-SFP       
  4    3  ASA Service Module                                     WS-SVC-ASA-SM1     
  5    3  ASA Service Module                                     WS-SVC-ASA-SM1     
  6    4  WiSM 2 WLAN Service Module                    WS-SVC-WISM2-K9    
  7    5  Supervisor Engine 2T 10GE w/ CTS (Acti    VS-SUP2T-10G     
  8    5  Supervisor Engine 2T 10GE w/ CTS (Hot)   VS-SUP2T-10G       
  9    4  WiSM 2 WLAN Service Module                    WS-SVC-WISM2-K9    
 10   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6848-GE-TX     
 11   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6848-GE-TX     
 12   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6848-GE-TX  

 

 

no outro Chassi que é o 6513 *(está parado e desligado) 

eu tenho 2 supervisoras  SUP-720-3B e outros módulos..

 

enfim, gostaria de saber se é possível fazer VSS?

 

Everyone's tags (1)
1 REPLY 1
VIP Mentor

HiYou need to have VS sups on

Hi

You need to have VS sups on each chassis to be able to create the VSS setup , the VS-SUP2T-10G is ok but the SUP-720-3B is not

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-virtual-switching-system-1440/prod_qas0900aecd806ed74b.html

 

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards