05-30-2013 11:27 AM - edited 03-07-2019 01:39 PM
I know that it is possible to make virtual switch link (VSL) between WS-X6708-10G modules.
Do supervisors have also to be 10G, or is it possible to make VSS with sup 720-3B and VSL between 10G line cards?
Solved! Go to Solution.
05-30-2013 11:41 AM
It's possible to make Virtual switch link between WS-X6708-10G modules
Yes.
Do supervisors also have to be 10G, or is it possible to make VSS with sup 720-3B and VSL between 10G line card?
No, only Sup-720-VS 3C and 3CXL and also Sup-2T support VSS.
HTH
05-30-2013 11:41 AM
It's possible to make Virtual switch link between WS-X6708-10G modules
Yes.
Do supervisors also have to be 10G, or is it possible to make VSS with sup 720-3B and VSL between 10G line card?
No, only Sup-720-VS 3C and 3CXL and also Sup-2T support VSS.
HTH
05-30-2013 03:43 PM
Further to Reza's reply, if you plan to upgrade to Sup2T, do NOT use 6708 because this line card will never be supported with the Sup2T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide