cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

177
Views
0
Helpful
4
Replies
Highlighted
Enthusiast

WAN and bandwidth help needed

I am getting a 50Mbs fiber internet connection in a few weeks and I will be sharing it with my neighbors.  The only option here is AT&T dedicated service which is very expensive. So we share it.

I am using a Cisco 3750v2 switch with IOS 15.0 and I have all the wiring to their houses done and working.  Each house will get a dedicated static public IP address.

What I would like to do is set each port to provide a minimum of 5Mbs per port (house) but if the full 50Mbs is available, they should be allowed to use the full 50Mbs.

The switch has a maximum bandwidth option but how do I set a minimum and allow the more if available?

Everyone's tags (1)
4 REPLIES 4
VIP Advisor

Re: WAN and bandwidth help needed

here is good document and once you build the config and tested, let us know any issue, we can asists you if you have any issue

 

https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-packet-marking/10100-priorityvsbw.html

BB
*** Rate All Helpful Responses ***
Enthusiast

Re: WAN and bandwidth help needed

Thank you for that information, I read it fully.

But... things have changed a little.  Here is my new needs.

Everyone (5-10 users) will have their one static public IP address.  I need to provide a minimum 5Mbs to each person based on IP addresses and not based on class other than VoIP which must have priority.

AT&T provided us a Cisco 4331 router and we have full access to the command line and we have a Cisco 3750G switch.

Any suggestions?

Enthusiast

Re: WAN and bandwidth help needed

Any suggestions?????

VIP Advisor

Re: WAN and bandwidth help needed

I have suggested the URL above, have made any configuration and tested? where did you suck now?

BB
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards