11-26-2014 09:31 AM - edited 03-07-2019 09:40 PM
Hello experts!
we have two nexus 9k core, attached to the HP Blade v7000 chasis and VPC configured. All Vlans are HSRP are configured. VPC is configured successfully. But the weird this is that source IP address 10.1.2.3 can ping the dest VIP (on the loadblanacer) but 10.1.2.4 can't ie all odd IP's can ping the vip and even IP's can't ping and this is happening in all other Vlans. No firewall no security applience ... windows firewalls are turned off, no ACL's on the swtiches. If I shut down the interface on nexus 1 then all IP's can ping the VIP, as soon as I unshut the interface then .4 stops pinging, and if I shutdown the interface on nexus 2 then all IP's can ping. 10 gig links are connected to Flex fabric card and vpc port channel is up. Any thoughts or help ?
Nexus 1 Nexus 2
11-26-2014 11:02 AM
Hi,
Is there a connection between Nexus1 and 2 for VPC peer link?
Can you post sh run and sh spann from both swithes?
HTH
11-26-2014 12:02 PM
Of course the VPC peer link and keep alives are up and all vpc's links are up and showing success
no port is being blocked by spanning tree
Had a case logged with Cisco tac and they couldn't find any thing weird on the nexus switch
11-26-2014 01:07 PM
Hello
Following on from Reza, Can you also post HRSP statistics and LB state.
Please review this also regards vpc gateway feature - here
res
Paul
11-27-2014 10:52 AM
Nexus 1
show hsrp active brief
P indicates configured to preempt.
|
Interface Grp Prio P State Active addr Standby addr Group addr
Vlan99 1 120 P Active local 10.104.0.3 10.104.0.1 (conf)
Vlan160 5 120 P Active local 10.104.5.3 10.104.5.1 (conf)
Vlan200 6 120 P Active local 10.104.6.3 10.104.6.1 (conf)
Vlan210 7 120 P Active local 10.104.7.3 10.104.7.1 (conf)
Vlan310 9 120 P Active local 10.104.9.3 10.104.9.1 (conf)
Vlan350 11 120 P Active local 10.104.11.3 10.104.11.1 (conf)
Vlan450 13 120 P Active local 10.104.13.3 10.104.13.1 (conf)
Vlan700 14 120 P Active local 10.104.14.6 10.104.14.4 (conf)
Vlan750 15 120 P Active local 10.104.15.3 10.104.15.1 (conf)
=======================
Nexus 2
show hsrp active brief
P indicates configured to preempt.
|
Interface Grp Prio P State Active addr Standby addr Group addr
Vlan100 3 120 P Active local 10.104.2.2 10.104.2.1
(conf)
Vlan150 4 120 P Active local 10.104.4.2 10.104.4.1
(conf)
Vlan199 2 120 P Active local 10.104.1.2 10.104.1.1
(conf)
Vlan300 8 120 P Active local 10.104.8.2 10.104.8.1
(conf)
Vlan320 10 120 P Active local 10.104.10.2 10.104.10.1
(conf)
Vlan400 12 120 P Active local 10.104.12.2 10.104.12.1
(conf)
Vlan760 16 120 P Active local 10.104.16.2 10.104.16.1
11-28-2014 03:40 AM
Issue resolved. Peer gateway feature wasn't enabled. After enabling this feature all working. Thanks for your help.
Regards
H
11-28-2014 03:59 AM
Hello
Glad to hear that
Please close the as resolved and rate them if they have been helpful
res
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide