What does PDSD process do? I can't seem to find any documentation that explains it.
I see a lot of documentation on IOSD, FED, but nothing on PDSD.
Router#show processes cpu sort | ex 0.0 Core 0: CPU utilization for five seconds: 99%; one minute: 95%; five minutes: 94% Core 1: CPU utilization for five seconds: 99%; one minute: 87%; five minutes: 86% Core 2: CPU utilization for five seconds: 92%; one minute: 72%; five minutes: 77% Core 3: CPU utilization for five seconds: 12%; one minute: 50%; five minutes: 46% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 6238 1542482 74706341 1106 21.34 23.55 23.62 0 pdsd 8573 1581456 15986674 75 2.28 2.38 2.25 0 iosd 8569 3824189 32483305 23 0.10 0.13 0.12 0 wcm
Purpose of the documentReference TopologyUse-CaseSymptomDiagnosisSolutionAdditional References
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The ...
Dear All, When I use the show interface command on the Cisco Router ISR-4331, it will display as below information. The word that I mark red, it refresh every 5 seconds. But, I compare with the old router model like a Cisco 29XX or 28X...
Whether you're attending VMworld 2019 on-site or from afar, read the latest on the key themes to expect. They are also the key themes for IT management today, from software defined everything to cloud and automation to IoT and edgecomputing : http:...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about SD-WAN), it's foundations and inner mechanisms as well as its correct design a...