03-05-2010 11:04 AM - edited 03-06-2019 10:00 AM
This is a 6509 with Sup-2/MSFC2. Can't find any reference to this error on the cisco web site.
03-05-2010 11:28 AM
Hello Lojo,
this is a message from redundancy feature
do you have two sup2/MSFC2 in this C6500?
OIR = online insertion and removal
SP = switch processor
WARN = severity level 4
primary = referred to primary active supervisor
FACILITY-SOURCE-SEVERITY-MNEMONIC: Message-text
the master supervisor was considered off line for a short time
if you issue a sh redundancy do you see two supervisors?
Hope to help
Giuseppe
07-29-2012 11:37 PM
We had the same issue here in a 6506. But the message came together with
%C6KENV-SP-4-FANTRAYFAILED: fan tray 1 failed
%C6KENV-SP-4-FANTRAYOK: fan tray 1 OK
%C6KENV-SP-4-FANTRAYFAILED: fan tray 1 failed
%C6KENV-SP-4-FANTRAYOK: fan tray 1 OK
....
after replacing the faulty fan tray both error messages disappeared. So the message
"%OIR-SP-4-WARN: PRIMARY(1) REPORTED AS NOT OCCUPIED IN SLOT!! disable_reason: 15(off (Reset)), get_peer_previous_slot: 0, is_occupied fn ptr:0x40499798" was a bit misleading.
HTH
/Eicke
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide