A service provider allowed private IPv6 BGP peering with a university research network. On receiving IPv6 traffic, one Cisco 12000 Series Router that is located in the path of IPv6 traffic experienced high CPU use on its single-port OC192 line card that caused OSPF adjacency to drop on its port. Prior to receiving IPv6 traffic, this OC192 port was passing approximately 1 Gb of IPv4 traffic without any noticeable CPU use. What are two possible reasons for this performance problem? (Choose two.)
A. IPv6 neighbor discovery is enabled. It should be disabled on point-to-point links because this helps with CPU use.
B. IPv6 DAD is enabled. It should be disabled in the service provider core.
C. The line card is not capable of hardware forwarding of IPv6 traffic.
D. The line card has an old fabric loader and FPGA code.
E. Cisco Express Forwarding has been disabled on the line card.
F. Some of the IPv6 traffic contains extension headers causing increased CPU use.
A rise in CPU usage related to a new traffic passing through a device suggests that the traffic must be process switched. In this case, it would indicate issues with hardware forwarding of the IPv6 traffic. Hence, I would personally go with C and F.
A major international airport is looking to build a cutting-edge new terminal, designed to run 24/7 with no interruptions. With the airport always on round the clock, a critical component required to support this is the surveillance infrastructure, which ...
Dear expert,I am facing an issue which you may come across before. Grateful if you would teach me how to do it.I have a Cisco WS-C3650-24TS switch in MZ which I would like to configure so that on the GigabitEthernet1 / 0/1 portis configured with VLAN 100,...
Hi AllWe are looking at some new switches for our top of racks in our DC.We have looked at the 9300 series UX models with the big buffers which is classed as a high scale model.I have tried to look at some Nexus models for top of rack, but there appears t...
The 1120s and 1160s are here to stay
In 1993, Cisco launched a series of branch routers – The Cisco 2500 - that redefined networking for its time and laid the foundation for things to come. Back then a router did what it was labelled to d...