11-26-2022 11:04 AM
Hello Cisco Team,
We want to upgrade one of the Catalyst C9300-48 switches which is currently running on Version 16.6.6. Could you please help us in providing the correct version to which we can upgrade and also provide the upgrade path?
Below is the details of the switch:
Cisco IOS XE Software, Version 16.06.06
Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.6.6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Thu 11-Apr-19 03:51 by mcpre
ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.8.1r [FC4], RELEASE SOFTWARE (P)
Technology Package License Information:
-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
network-advantage Permanent network-advantage
dna-advantage Subscription dna-advantage
cisco C9300-48P (X86) processor with 1392597K/6147K bytes of memory.
Processor board ID FCW2334C1D0
14 Virtual Ethernet interfaces
52 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
2 Forty Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
1638400K bytes of Crash Files at crashinfo:.
11264000K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.
Base Ethernet MAC Address : f4:bd:9e:d4:10:80
Motherboard Assembly Number : 73-18274-04
Motherboard Serial Number : FOC233332EC
Model Revision Number : A0
Motherboard Revision Number : B0
Model Number : C9300-48P
System Serial Number : FCW2334C1D0
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 62 C9300-48P 16.6.6 CAT9K_IOSXE INSTALL
Configuration register is 0x102
Thanks & Regards,
Gautam Venna
11-26-2022 08:38 PM
Upgrade to the latest 16.6.X.
11-27-2022 10:23 AM
Hello Leo,
Thanks for the update!!!
One more question: Can we upgrade the switch directly from 16.6.6 to 17.3.5 ?
Thanks & Regards,
Gautam Venna
11-27-2022 02:41 PM
I would not recommend 17.3.X.
If you still want to go up to 17.X.X then use 17.6.4.
11-27-2022 03:11 PM
BTW, where to look for this info: https://software.cisco.com/download/home/286313983/type/282046477/release/Bengaluru-17.6.4
"One more question: Can we upgrade the switch directly from 16.6.6 to 17.3.5 ?"
Release notes for 17.3.5, can be found through the above reference, should note any consideration when upgrading.
Also BTW, although 17.3.5 is a Cisco recommended release so is 17.6.4, and as @Leo Laohoo works extensively with Cisco switches, his recommendations should be carefully considered.
11-27-2022 10:27 PM - edited 11-27-2022 10:29 PM
@Joseph W. Doherty, something to warm your heart ...
The above stack no longer responds to console nor SSH -- We call it a "runaway switch".
11-28-2022 07:47 AM
Well at least it took several months.
(Hmm, I sometime wonder if Cisco has been hiring many former Microsoft software developers.)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide