cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1533
Views
5
Helpful
5
Replies
Highlighted
Beginner

What is the Real World Throughput of Cisco 1100 Series (C1100-8P and C1100-4P)?

I can't find the actual throughput of the above.

 

The data sheet says Crypto Performance is 250Mbps and 150Mbps respectively but not what the throughput is without any sort of Crypto. https://www.cisco.com/c/en/us/products/collateral/routers/1000-series-integrated-services-routers-isr/datasheet-c78-739512.html

 

Has anyone had any experience with these devices, can they push 1Gbps? Or does anyone know where to find a whitepaper on them similar to this?

5 REPLIES 5
Beginner

Re: What is the Real World Throughput of Cisco 1100 Series (C1100-8P and C1100-4P)?

I would also like to know the answer to your question.. 

 

1) Routing performance without NAT/FW (I.e. No-NAT)

2) Routing performance with NAT

3) Routing performance with NAT/FW 

 

Can anyone out there help?

 

Thanks 

Beginner

Re: What is the Real World Throughput of Cisco 1100 Series (C1100-8P and C1100-4P)?

I have pushed 1GBps over FTTP using NAT (1 User test scenario) on a C1112-8P

Beginner

Re: What is the Real World Throughput of Cisco 1100 Series (C1100-8P and C1100-4P)?

Hey,

 

I found this online, hope it helps!

ISR 1100 Performance  
FunctionC1100-4P with HSECC1100-8P with HSEC
CPU Frequency800MHz1200MHz
Ethernet Switch4xGE LAN w/ 1Gbps uplink8xGE LAN w/2.5Gbps uplink
 2-port POE+4-port POE+
Generic traffic throughputUn-throttledUn-throttled
Crypto traffic throughput50Mbps (Default)50Mbps (Default)
 150 Mbps250 Mbps
HSEC license supportSupport beyond 150 MbpsSupport beyond 250 Mbps
   
   
Traffic ProfilesC1100-4P with HSECC1100-8P with HSEC
CEF IMIX1,252 Mbps1,750 Mbps
Ipsec (AES256) IMIX230 Mbps335 Mbps
NAT IMIX660 Mbps960 Mbps
HQoS IMIX650 Mbps910 Mbps
ACL+NAT+HQoS330 Mbps510 Mbps
Beginner

Re: What is the Real World Throughput of Cisco 1100 Series (C1100-8P and C1100-4P)?

According to this...

https://blog.router-switch.com/2018/05/cisco-1000-series-isr-naming/

The HSEC license completely lifts the crypto shaper on the device. Do you know if this affects the throughput limit of non-encrypted traffic?

ie, does the non-encrypted throughputs above apply to a device with standard IP BASE?

 

 

With the IP Base and SEC license, encrypted traffic is shaped at 50 Mbps. A performance license is needed only for encrypted traffic of over 50 Mbps. There are currently two types of performance license; HSEC and IPsec Performance. The HSEC will disable the shaper completely, whereas the IPsec Performance will only lift up the bar on the shaper to 250 Mbps for the 8 LAN port SKUs, and to 150 Mbps for the 4 LAN port SKUs.

Beginner

Re: What is the Real World Throughput of Cisco 1100 Series (C1100-8P and C1100-4P)?

Does this answere your question?

ISR 1100 Performance  
FunctionC1100-4P with HSECC1100-8P with HSEC
Generic traffic throughputUn-throttledUn-throttled
Crypto traffic throughput50Mbps (Default)50Mbps (Default)
 150 Mbps250 Mbps
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards