09-27-2012 11:03 AM - edited 03-07-2019 09:09 AM
Hi,
Someone can help me to know what should it be the minimum IOS version that I require on my WS-C6509-E equipments to support "logging origin-id" command?
Cisco documentation says that this command was introduced in 12.2(15)T, and integrated into 12.2(33)SXH.
BUT my Cisco switches have 12.2(33)SXH5 IOS version......and they do not support "logging origin-id".
switchb(config)#logging ?
Hostname or A.B.C.D IP address of the logging host
buffered Set buffered logging parameters
buginf Enable buginf logging for debugging
cns-events Set CNS Event logging level
console Set console logging parameters
count Count every log message and timestamp last occurance
esm Set ESM filter restrictions
event Global interface events
exception Limit size of exception flush output
facility Facility parameter for syslog messages
filter Specify logging filter
history Configure syslog history table
host Set syslog server IP address and parameters
ip IP configuration
listen MWAM remote console and logging listen enabler
monitor Set terminal line (monitor) logging parameters
on Enable logging to all enabled destinations
rate-limit Set messages per second limit
reload Set reload logging level
source-interface Specify interface for source address in logging transactions
system enable/disable System Event Log
trap Set syslog server logging level
userinfo Enable logging of user info on privileged mode enabling
switchb(config)#
switchb#sh ver
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH5, RELEASE SOFTWARE (fc1)
System image file is "sup-bootdisk:s72033-ipservicesk9_wan-mz.122-33.SXH5.bin"
......
cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of memory.
Processor board ID SMG1347N080
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
switchb#
Any feedbacks? They would be very appreciated.
Thanks,
guruiz
09-27-2012 01:46 PM
Not sure about the min version but I have logging origin-id
VSS-CoreA#sh runn | inc logging origin-id
logging origin-id hostname
VSS-CoreA#sh ver | inc IOS
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXI5
Hope this helps.
10-09-2012 07:39 PM
Thanks tglen,
Sure it helps a lot !
I need to consider an IOS upgrade to 12.2.(33)SXI if I want to support this command on my 6509E....
Thanks.
guruiz
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: