cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

363
Views
0
Helpful
2
Replies
Highlighted
Beginner

which IOS vesrtion supported the stp feature

hi All,

i want to know of the IOS verstion of cisco switch which support STP,

some one told me that this feature is activated by deafalut if it not activated,how to turn on this Feature

i am using cisco 2960 Switch

thanks

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions
Contributor

which IOS vesrtion supported the stp feature

Hi,

Spanning-tree is enabled by default and available on all version as far as I know.

check it with "show spanning-tree"

regards,

Sebastian

View solution in original post

2 REPLIES 2
Contributor

which IOS vesrtion supported the stp feature

Hi,

Spanning-tree is enabled by default and available on all version as far as I know.

check it with "show spanning-tree"

regards,

Sebastian

View solution in original post

Advocate

Re: which IOS vesrtion supported the stp feature

By default spanning tree is enabled. Default version is pvst+ on most of devices. This means a separate spanning tree instance for every vlan. You can check by running below commands:
Show spanning-tree
Show spanning-tree summary

You can change the mode or enable if its disabled by:

Spanning-tree mode (pvst | mst | rapid-pvst). < depending upon the one you need

Hope it helps

Terry

Sent from Cisco Technical Support iPad App

CreatePlease to create content
Content for Community-Ad