Why are my syslog time stamps are different?

[spfeffer]

When I look at my syslogs on my 4006 switch, the events that are logged look like they have the correct time on them. If I go in and do a config t and then back out and look at the syslog, the timestamp on the new entry is incorrect. Any ideas?

Sonny

Dec 5 06:06:38: %RCMD-4-RSHPORTATTEMPT: Attempted to connect to RSHELL from 10.200.206.7

Dec 5 14:36:51: %SYS-5-CONFIG_I: Configured from console by pfeffes on vty0 (10.200.15.24)

Dec 5 14:39:30: %SYS-5-CONFIG_I: Configured from console by pfeffes on vty0 (10.200.15.24)

CM2ISS01#sh clock

08:40:02.952 CST Tue Dec 5 2006

[mark.edwards]

try setting you timestamp to localtime as below. CST is -6 hours.http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123tcr/123tfr/cfrgt_01.htm#wp1099739

service timestamps log datetime localtime

[Edison Ortiz]

You need to include the following in your config

service timestamps log datetime localtime show-timezone

clock timezone CST -6

clock summer-time CDT recurring

___

Please rate helpful posts.