Hi,
Summarizing the following:
permit ip host 10.200.1.2 host 10.200.1.1
permit ip host 10.200.2.2 host 10.200.2.1
permit ip host 10.200.3.2 host 10.200.3.1
permit ip host 10.200.4.2 host 10.200.4.1
permit ip host 10.200.5.2 host 10.200.5.1
permit ip host 10.200.6.2 host 10.200.6.1
permit ip host 10.200.7.2 host 10.200.7.1
permit ip host 10.200.8.2 host 10.200.8.1
permit ip host 10.200.9.2 host 10.200.9.1
permit ip host 10.200.11.2 host 10.200.11.1
With the following:
permit ip 10.200.0.2 0.0.15.0 10.200.0.1 0.0.15.0
Would that work?
I checked and the command is accepted, but I am unsure if it would work as expected.
