This is a follow-up of a question I asked here: https://supportforums.cisco.com/discussion/12180986/rv220w-only-routing-icmp-traffic
I have a recently-purchased rv220w wireless router. My setup is as follows: Internet -> asa 5505 -> 10.0.1.0 subnet -> wireless router (subnet 10.0.3.0, public facing ip is 10.0.1.140).
I can ping between the two subnets fine, but not much else. I did a packet capture with wireshark and noticed something really interesting. If I try to connect from a machine from the 10.0.1.0 subnet to the 10.0.3.0 subnet, say remote desktop for this example, I get a SYN, then a SYN_ACK, and then not ACK back. Only a reset (RST) is getting sent from the machine initiating the connection.
This is super weird. ANy help would please be appreciated. I have the detailed captures if necessary.
UPDATE: I have uploaded the wireshark capture.