cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2771
Views
0
Helpful
10
Replies

WS-45xx bundles questions

sherbinasergey
Level 1
Level 1

Hello,

I am interesting in 2 bundles (WS-C4507RE+96V+ and WS-C4510RE-S7+96V+) which described in the FAQ of New Cisco Catalyst 4500 E-Series Redundant Chassis (question 9 and 10):

WS-C4507R+E and WS-C4510R+E. They say, that both bundles have installed:

  • 1x Chassis (WS-C4507R+E and WS-C4510R+E, respectively)
  • 1x Supervisor (WS-X45-SUP7L-E and WS-X45-SUP7-E, respectively)
  • 2x line cards with 10/100/1000 PoE+ supported ports (WS-X4748-RJ45V+E)

I have some questions about this:

  1. Is it correct list and supervisors included?
  2. Retail GPL price for any bunlde is lower (~30%) than separately parts costs total. Is it ok?
  3. Power supplies dont included in bundle and I should order its separately?
  4. How about SMARTnet part number(s) on bundle if I'll order some more modules/cards (i.e. redundant supervisor of right type and 10G fiber line cards)?


2 Accepted Solutions

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

If you want to get an accurate configuration, use the dynamic configuration tool

https://apps.cisco.com/qtc/config/html/configureHomeGuest.html

Power supplies dont included in bundle and I should order its separately?

That is correct, usually you add the power supply to your order.  It does not come with the chassis.

How about SMARTnet part number(s) on bundle if I'll order some more modules/cards (i.e. redundant supervisor of right type and 10G fiber line cards)?

The same here.  SmarNet is usually separate.

Retail GPL price for any bunlde is lower (~30%) than separately parts costs total. Is it ok?

Sometimes, bundle is cheaper, but after you put some configs together using the above link, talk to you sales person.  It also depends on the discount level you get.

HTH

View solution in original post

Is it normal that bundle costs (by GPL price) more cheaper than the same parts separately ?

Yes, usually that is the case.

Now, that you have a pretty good config, talk to you sales rep to make sure you get the proper discount, correct SmartNet contract, etc..

HTH

View solution in original post

10 Replies 10

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

If you want to get an accurate configuration, use the dynamic configuration tool

https://apps.cisco.com/qtc/config/html/configureHomeGuest.html

Power supplies dont included in bundle and I should order its separately?

That is correct, usually you add the power supply to your order.  It does not come with the chassis.

How about SMARTnet part number(s) on bundle if I'll order some more modules/cards (i.e. redundant supervisor of right type and 10G fiber line cards)?

The same here.  SmarNet is usually separate.

Retail GPL price for any bunlde is lower (~30%) than separately parts costs total. Is it ok?

Sometimes, bundle is cheaper, but after you put some configs together using the above link, talk to you sales person.  It also depends on the discount level you get.

HTH

Nice tool, thank you. My configuration is:

WS-C4507RE+96V+
     WS-C4507R+E Chassis, two WS-X4648-RJ45V+E, Sup7L-E, LAN Base
1
      PWR-C45-1300ACV
      Catalyst 4500 1300W AC Power Supply (Data and PoE)
1
      PWR-C45-1300ACV/2
      Catalyst 4500 1300W AC Power Supply (Data and PoE)
1
      CAB-CEE77-C19-EU
      CEE 7/7 to IEC-C19 13ft Europe
2
      C4500E-S7L-DEFAULT
      Default WS-X45-SUP7L-E with WS-X4648-RJ45V+E Bundle
1
      WS-X45-SUP7L-E/2
      Catalyst 4500 E-Series Supervisor 7L-E, 520Gbps redundant
1
      WS-X4648-RJ45-E
      Catalyst 4500 E-Series 48-Port 10/100/1000 (RJ45)
1
      WS-X4606-X2-E
      Catalyst 4500 E-Series 6-Port 10GbE (X2)
1
      X2-10GB-LRM
      10GBASE-LRM X2 Module
3
      X2-10GB-LRM
      10GBASE-LRM X2 Module
3
      WS-X4606-X2-E
      Catalyst 4500 E-Series 6-Port 10GbE (X2)
1
      X2-10GB-LRM
      10GBASE-LRM X2 Module
3
      X2-10GB-LRM
      10GBASE-LRM X2 Module
3
      S45EUK9-33-1511SG
      CAT4500e SUP7-E/SUP7L-E Universal Crypto Image
1
      Included: WS-X4648-RJ45V+E
      Catalyst 4500 E-Series 48-Port PoE+ Ready 10/100/1000(RJ45)
2
      Included: WS-X45-SUP7L-E
      Catalyst 4500 E-Series Supervisor 7L-E, 520Gbps
1
      Included: C4500E-IPB
      Paper IP Base License
1

It included IP BASE license (cost 0) which be able to use SSO feature for failover supervisors.

Is it normal that bundle costs (by GPL price) more cheaper than the same parts separately ?

Hmmmm ... I would recommend you wait for the next few weeks (after Cisco Live).

There's a new supervisor card about to come out. 

Is it normal that bundle costs (by GPL price) more cheaper than the same parts separately ?

Yes, usually that is the case.

Now, that you have a pretty good config, talk to you sales rep to make sure you get the proper discount, correct SmartNet contract, etc..

HTH

sherbinasergey
Level 1
Level 1

How about SMARTnet contracts? I found only

CON-SNT-C4507REVSMARTNET 8X5XNBD WS-C4507R+E Chassis,2   WS-X4648-RJ45V+E

but supervisor, line cards not included. How to cover rest parts by smartnet?

but supervisor, line cards not included. How to cover rest parts by smartnet?

SMARTnet covers the entire chassis, whcih will include Supervisor cards, line cards, fan trays, power supply.

Correct.  As Leo also said it correctly, the SmartNet covers the entire chassis which includes all the parts.

HTH

Reza, PM sent.

Go it.

Thanks Leo!!

Reza

sherbinasergey
Level 1
Level 1

Thanks to all for answers

Review Cisco Networking for a $25 gift card