Dear All,
I have an issue with one of our switches, switch model WS-C2960-24TC-L, i am not able to display switch temperature as below,
Switch#sh ver
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE2, RELE
ASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 05-Feb-13 12:41 by prod_rel_team
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)SEE1, RELEASE SOFTWA
RE (fc1)
Switch uptime is 4 days, 3 hours, 17 minutes
System returned to ROM by power-on
System restarted at 14:49:43 EST Thu May 16 2013
System image file is "flash:c2960-lanbasek9-mz.150-2.SE2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C2960-24TC-L (PowerPC405) processor (revision B0) with 65536K bytes of
memory.
Processor board ID FOC1047X1P4
Last reset from power-on
2 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:1A:6C:17:08:80
Motherboard assembly number : 73-9832-06
Power supply part number : 341-0097-02
Motherboard serial number : FOC10465BPG
Power supply serial number : DCA1043802P
Model revision number : B0
Motherboard revision number : C0
Model number : WS-C2960-24TC-L
System serial number : FOC1047X1P4
Top Assembly Part Number : 800-26671-02
Top Assembly Revision Number : C0
Version ID : V02
CLEI Code Number : COM3K00BRA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TC-L 15.0(2)SE2 C2960-LANBASEK9-M
Configuration register is 0xF
Switch#sh env temperature status
System Temperature Value: Not Supported
System Temperature State: Not Supported
Switch#
is there is a way to fix this issue, as i have Cisco works (LMS) and it is not able to read switch temperature.
Thanks
