Dear All,
I am facing given below issue, Can anyone help to fix this issue.
Cisco Catalyst switch stops booting after given below process,
Using driver version 1 for media type 1
Base ethernet MAC Address: 2c:36:f8:1d:d9:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
mifs[2]: 13 files, 1 directories
mifs[2]: Total bytes : 1806336
mifs[2]: Bytes used : 891392
mifs[2]: Bytes available : 914944
mifs[2]: mifs fsck took 1 seconds.
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes : 3870720
mifs[3]: Bytes used : 1024
mifs[3]: Bytes available : 3869696
mifs[3]: mifs fsck took 2 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 9216
mifs[4]: Bytes available : 248832
mifs[4]: mifs fsck took 0 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 21968896
mifs[6]: Bytes available : 35962880
mifs[6]: mifs fsck took 31 seconds.
...done Initializing Flash.
done.
Loading "flash:c2960-lanbasek9-mz.122-55.SE11.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:c2960-lanbasek9-mz.122-55.SE11.bin" uncompressed and installed, entr
y point: 0x3000
executing...
