cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1390
Views
0
Helpful
22
Replies
ciscoreg2
Beginner

WS-C2960S-24TS-L-UPDATE ISSUE-152-2.E9

Hi,

My switch was WS-C2960S-24TS-L, after upgrade to 152-2.E9, the switch unable to boot up, below was the error:
File "flash:c2960s-universalk9-mz.152-2.E9.bin" uncompressed and installed, entry point: 0x3000
executing...
Loading "flash:/c2960s-universalk9-mz.152-2.E9.bin"...

File "flash:/c2960s-universalk9-mz.152-2.E9.bin" uncompressed and installed, entry point: 0x3000
executing...
Boot process failed...

anyone has same issue?

22 REPLIES 22

Did you want to see c2960s-universalk9-mz.152-2.E9.bin if exist? I have delete and upload for several times from xmodem and tftp. But it does exist.

Yes, I need to see if the image size matches or if there is anything Else it’s trying to boot from.

dir flash:
Directory of flash:/

2 -rwx 5479 Jun 20 2019 21:46:16 +08:00 private-config.text
625 -rwx 3096 Jan 2 2006 08:01:47 +08:00 multiple-fs
4 -rwx 16800768 Jun 20 2019 21:35:51 +08:00 c2960s-universalk9-mz.152-2.E9.bin

Leo Laohoo
VIP Community Legend

That error message, to me, sounds like the BIN fine is corrupted in some way.
Can you reboot the appliance again by PULLING THE POWER CABLE?

Yes, I have done several reboot...

Do the following commands to boot from the following image.  or copy and paste. Make sure everything matches the same.
switch:BOOT=flash:c2960s-universalk9-mz.152-2.E9.bin
switch:boot

I did this command before, and it will show the error same as power-on after loading ios.
Leo Laohoo
VIP Community Legend

Can you try loading, say, 12.2(55)SE train?