cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1198
Views
0
Helpful
1
Replies
Highlighted
Beginner

WS-C3550-48-SMI - Config.

Hi, I have a WS-C3550-48-SMI switch and am wanting to do a redundant switch configuration.

I am looking to  go for an active / active HSRP configuration using one additional switch rather than chassis based.

Has anybody done this before and have any pointers?

Everyone's tags (9)
1 REPLY 1
Enthusiast

Re: WS-C3550-48-SMI - Config.

Hi,

Since it's difficult to tell what would be the best solution for your network as every network is different, I'd encourage you to check the following guides for more details and examples about HSRP.

Using HSRP for Fault-Tolerant IP Routing

http://www.cisco.com/en/US/docs/internetworking/case/studies/cs009.html

Hot Standby Router Protocol (HSRP): Frequently Asked Questions

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a00800a9679.shtml

Hot Standby Router Protocol Features and Functionality

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a91.shtml

Configuring HSRP on Catalyst 3550 Switches

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/configuration/guide/swhsrp.html

Andras

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards