cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2964
Views
10
Helpful
6
Replies

WS-C3650-48PD 16.9.5 POE Faulty Status

丢包了亲
Level 1
Level 1

Hey all experts,

I have 1 3650 switch here connected with 2 Crestron devices at port gi1/0/3 and gi1/0/41 with standard POE 15.4w.

But the switch is showing errors like below:

 

3650#show power inline

Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 780.0 6.5 773.5
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/1 auto on 6.5 Ieee PD 2 30.0
Gi1/0/2 auto off 0.0 n/a n/a 30.0
Gi1/0/3 auto faulty 0.0 n/a n/a 30.0

 

Jan 27 12:30:03.669 MET: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/41: High number of events received on the port, please monitor the connected device
Jan 27 12:30:04.571 MET: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/15: PD removed
Jan 27 12:30:04.681 MET: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/15: PD removed
Jan 27 12:30:04.682 MET: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/15: High number of events received on the port, please monitor the connected device
Jan 27 12:30:05.582 MET: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/8: PD removed
Jan 27 12:30:05.691 MET: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/3: PD removed
Jan 27 12:30:05.692 MET: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/3: High number of events received on the port, please monitor the connected device
Jan 27 12:30:06.702 MET: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/8: PD removed
Jan 27 12:30:06.703 MET: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/8: High number of events received on the port, please monitor the connected device

 

Have tried to shut/noshut, power inline never and static at high priority to 15.4w. The port POE operation status will always be put into faulty stage.

Any clue how to solve it? Will talk to cabling vendor try to direct connect switch and Crestron devices, bypass the long cables for test purpose.

6 Replies 6

balaji.bandi
Hall of Fame
Hall of Fame

Is this working one failing or never worked ? is the same issue with other ports also ? is any other device working as expected ?

 

what is the end device power requirement, 15.4 or more ?

 

can you also post show version from the device please.

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello,

 

run a cable diagnostics test on the interfaces and post the output:

 

test cable-diagnostics tdr int gig 1/0/3
test cable-diagnostics tdr int gig 1/0/8
test cable-diagnostics tdr int gig 1/0/15
test cable-diagnostics tdr int gig 1/0/41

 

show cable-diagnostics tdr int gig 1/0/3
show cable-diagnostics tdr int gig 1/0/8
show cable-diagnostics tdr int gig 1/0/15
show cable-diagnostics tdr int gig 1/0/41

Leo Laohoo
Hall of Fame
Hall of Fame

Post the complete output to the following commands: 

sh version
sh lldp interface <PORT>
sh interface <PORT> CONTROLL

丢包了亲
Level 1
Level 1

Cisco TAC suggest to do an RMA to solve this problem...so I guess it is a hardware issue in the end...thank you all for the help anyway!


@丢包了亲 wrote:

Cisco TAC suggest to do an RMA to solve this problem...so I guess it is a hardware issue in the end...thank you all for the help anyway!


Ask them about MOSFET.

bouke.stelpstra
Level 1
Level 1

I had the same problem.

All the AP's on the switch were offline.

sh power inline saw them as IEEE PD.

show power inline

Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/1 auto on 30.0 Ieee PD 4 30.0
Gi1/0/2 auto on 16.8 Ieee PD 4 30.0

switch # sh int status

Port Name Status Vlan Duplex Speed Type
Gi1/0/1 Access-Point notconnect xxx auto auto 10/100/1000BaseTX
Gi1/0/2 Access-Point notconnect xxx auto auto 10/100/1000BaseTX
Gi1/0/3 Access-Point notconnect xxx auto auto 10/100/1000BaseTX

a reload of the switch solved the problem .

All AP's were coming online.

 

 

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: