06-01-2023 05:46 PM
I have inherited a handful of used switches.
Model number = WS-C3850-48P
I connected to one unit via usb console cable and was presented with the initial configuration dialogue and was able to set the required IP to VLAN1 and I created a user with the following command:
username Cisco privi 15 password "secret password"
I then did a reload and was able to connect via ethernet cable using webui.
On the second switch, connected with usb console cable via putty, even though I deleted the configuration, I could never get that same initial configuration dialog like first switch. Still, I was able to set VLAN1 IP to my requirement and create the same user with same command as I did on the first switch and I am able to connect to WEBUI but not authenticate.
When I try to log into webui I get "Wrong Credentials. Please Login again." and via putty I see the following:
*Jun 2 00:21:37.038: %WEBSERVER-5-LOGIN_FAILED: Switch 2 R0/0: nginx: Login Un-Successful from host 192.168.60.250
I have tried 3 different browsers.
Second switch is:
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 2 56 WS-C3850-48P 16.9.5 CAT3K_CAA-UNIVERSALK9 INSTALL
What am I missing?
Solved! Go to Solution.
06-01-2023 06:00 PM - edited 06-01-2023 06:06 PM
Hi
Run
ip http authentication local
aaa authentication login default local
aaa authorization exec local
aaa authorization network local
06-01-2023 06:00 PM - edited 06-01-2023 06:06 PM
Hi
Run
ip http authentication local
aaa authentication login default local
aaa authorization exec local
aaa authorization network local
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: