Thanks Leo, here is the requested output.
Switch#sh log on summary start 0:0:0 20 may 2020
PID: WS-C4510R+E , VID: 10 , SN: <SN>
--------------------------------------------------------------------------------
UPTIME SUMMARY INFORMATION
--------------------------------------------------------------------------------
First customer power on : 12/27/2012 22:51:15
Total uptime : 7 years 12 weeks 5 days 1 hours 15 minutes
Total downtime : 0 years 8 weeks 2 days 9 hours 11 minutes
Number of resets : 28
Number of slot changes : 3
Current reset reason : 0x9
Current reset timestamp : 05/21/2020 22:17:38
Current slot : 6
Current subslot : 0
Current uptime : 0 years 0 weeks 0 days 12 hours 0 minutes
--------------------------------------------------------------------------------
Reset | |
Reason | Count |
--------------------------------------------------------------------------------
No historical data to display
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
ENVIRONMENT SUMMARY INFORMATION
--------------------------------------------------------------------------------
MM/DD/YYYY HH:MM:SS Ins count Rem count
------------------------------------------------------------
VID PID TAN Serial No
--------------------------------------------------------------------------------
No environment summary data to display
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
TEMPERATURE SUMMARY INFORMATION
--------------------------------------------------------------------------------
Number of sensors : 7
Sampling frequency : 1 minutes
Maximum time of storage : 10 minutes
--------------------------------------------------------------------------------
Sensor | ID | Maximum Temperature 0C
--------------------------------------------------------------------------------
Stub A 0 38
Stub B 1 34
XPP 2 44
VFE 3 54
NFE 4 44
CPU 5 51
FPGA 6 35
--------------------------------------
Temp Sensor ID
0C 1 2 3 4 5 6 7
--------------------------------------
1 15y 15y 15y 15y 15y 15y 15y
20 0m 149m 0m 0m 0m 0m 0m
21 0m 21h 0m 0m 0m 0m 0m
22 0m 82h 0m 0m 0m 0m 0m
23 0m 139h 0m 0m 0m 0m 0m
24 0m 188h 0m 0m 0m 0m 0m
25 40m 400h 0m 0m 0m 0m 0m
26 40h 218h 0m 0m 0m 0m 18m
27 88h 108m 0m 0m 0m 0m 96h
28 191h 0m 0m 0m 0m 0m 157h
29 208h 0m 0m 0m 0m 0m 235h
30 380h 0m 0m 0m 0m 0m 409h
31 145h 0m 0m 0m 0m 0m 155h
32 10m 0m 0m 0m 0m 0m 10m
34 0m 14m 0m 0m 366m 0m 0m
35 0m 0m 0m 0m 46h 0m 14m
36 0m 0m 0m 0m 126h 0m 0m
37 0m 0m 0m 0m 164h 0m 0m
38 14m 0m 56h 0m 274h 981m 0m
39 0m 0m 157h 0m 339h 64h 0m
40 0m 0m 160h 0m 97h 96h 0m
41 0m 0m 313h 0m 0m 202h 0m
42 0m 0m 343h 40h 0m 357h 0m
43 0m 0m 23h 103h 0m 288h 0m
44 0m 0m 14m 170h 14m 30h 0m
45 0m 0m 0m 291h 0m 0m 0m
46 0m 0m 0m 386h 0m 0m 0m
47 0m 0m 0m 63h 0m 0m 0m
51 0m 0m 0m 0m 0m 14m 0m
54 0m 0m 0m 14m 0m 0m 0m
--------------------------------------------------------------------------------
INTERRUPT SUMMARY INFORMATION
--------------------------------------------------------------------------------
Name | ID | Offset | Bit | Count
--------------------------------------------------------------------------------
No historical data to display
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
ERROR MESSAGE SUMMARY INFORMATION
--------------------------------------------------------------------------------
Facility-Sev-Name | Count | Persistence Flag
MM/DD/YYYY HH:MM:SS
--------------------------------------------------------------------------------
No historical data to display
--------------------------------------------------------------------------------
its a dual sup setup, currently the secondary sup is active:
Switch#sh redundancy
Redundant System Information :
------------------------------
Available system uptime = 13 hours, 30 minutes
Switchovers system experienced = 3
Standby failures = 0
Last switchover reason = user_forced
Hardware Mode = Duplex
Configured Redundancy Mode = Stateful Switchover
Operating Redundancy Mode = Stateful Switchover
Maintenance Mode = Disabled
Communications = Up
Current Processor Information :
------------------------------
Active Location = slot 6
Current Software state = ACTIVE
Uptime in current state = 12 hours, 54 minutes
Peer Processor Information :
------------------------------
Standby Location = slot 5
Current Software state = STANDBY HOT
Uptime in current state = 12 hours, 43 minutes
Since I had the following messages on the primary sup:
IOSDLOG: eip_os_info_cempmempoolentry_instance_ctx_init: ../iosd/providers/os_info_p/cempmempoolentry_crudx_cb.c: 63: mempool 1 wasn't found in the list
IOSDLOG: process_get_oper_prop_values: ../VIEW_ROOT/cisco.comp/nova-libeiipc/eicore_provider.c: 249: provider returned error (rc=102, err=Getter for cempMemPoolType returned error
)
oh in temperature history data, I could not find a rise prior the incident.
