11-26-2014 07:46 PM - edited 03-07-2019 09:41 PM
Hi All,
Any idea or permanent fix for this error on Cisco Chassis 6500 series?
194441: Nov 27 05:32:23.605 SGT: %FM-SW1-6-FM_CONSISTENCY_CHECK_LOG_STATUS: Consistency Checker found inconsistency.
Consistency run details : Timestamp 2014-11-27@05:22:23. Log Id: 6966
Please use 'show platform feature-manager consistency-check log 6966'
to get details about the failed consistency checks.
Found few posts before, it's due to RBACL. Reboot the switch will solves.
Hope for a fix.
Regards,
J.
11-27-2014 02:39 AM
Goh,
Feature Manager is a software entity that keeps track of all features that have impact
on hardware forwarding, and will resolve conflicts as well as share hardware resources
among multiple interfaces.
So basically whenever there is inconsistency between FM and TCAM it gets corrected itself.
It could be a transient issue or if too often getting these errors, reseating or reloading
SUP could resolve.
Could you quickly grab the following outputs:
Show platform feature-manager consistency-check log 6966
HTH
11-27-2014 07:19 PM
Hi Insharie,
Log 6966 already overwritten I believe.
Below is the later logs can be seen from chassis.
#Show platform feature-manager consistency-check log 7025
=====================================
CONSISTENCY CHECKER : ENABLED
remaining timer value: 327 seconds
=====================================
Log Id 7025
Log Type Static Features
Timestamp 2014-11-28@10:52:27
Feature Manager auto-correct is currently enabled
-----------------------------------------
[1]: No inconsistencies found on this run.
Regards,
J.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide