02-28-2007 09:15 AM - edited 03-05-2019 02:37 PM
Are the ports on these line cards configurable for the speed? I need to attach network printers that only have 10/100 TX cards in them and I'm trying to figure out what's the best way to handle this? Configure the port (assuming that's an option)and put a cheaper media converter on OR put a $300+ Gb media converter on. Thanks in advance!
Carla Decker
02-28-2007 10:54 AM
The WS-X4448-GB-SFP operates in 1000Gb Full duplex only. you will need to use a converter or different line card.
02-28-2007 11:34 AM
Carls,
Generally the ports on these modules are not configurable and it depends on the SFP transceiver modules that you are using. However using GLC-T 1000base copper SFP modules you can configure the speed to 10,100,100 or auto. Please have a look at the link below for more info.
HTH,Please rate if it does.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide