05-18-2016 03:50 PM - edited 03-08-2019 05:49 AM
I have WS-X45-SUP8L-E on chassis 4506-E trying configure. but I received and FPGA'S error. here is the output anyone has been there and have a clue how to fix it. any help will be appreciated.
Please see below my output I tried to boot from TFTP, USB0, and nothing works.
Thanks
***************************************************************************************
But Couldn't find proper FPGAs in the firmware package
Failed to program FPGA
ERROR: Failed to program FPGAs
rommon 1 >
I tried boot from a Tftp server :
Rom Monitor (P) Version 15.1(1r)SG(0.046)
Compiled Thu 10-Sep-15 14:33 [RLS]
System : WS-X45-SUP8L-E Slot [1]
Chassis : WS-C4503*E
Revision : CPU 2.1 BOARD 2.0 FPGA 4.3571.7DC7
Memory : 4096 MB
Date : Wed Jul 26 22:05:26 2000
MacAddress : 6c-20-56-d5-a1-75
IpAddress : 192.168.0.249
NetMask : 255.255.255.0
Gateway : 192.168.0.1
TftpServer : 10.1.1.1
Link Speed : 1Gb Full Duplex
rommon 0 >ping 192.168.0.130
Pinging 192.168.0.130
!!!!
192.168.0.130 is alive!
rommon 1 >boot tftp://192.168.0.130/cat4500es8-universalk9.SPA.03.06.00.E.152-2.E.bin
Link Speed : 1Gb Full Duplex
Filename : /cat4500es8-universalk9.SPA.03.06.00.E.152-2.E.bin
IpAddress : 192.168.0.249
TftpServer : 192.168.0.130
TftpBlkSize : 1468
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*
File Size : 199051336
MD5 : a32df24fdfc54776f20d83c092f24496
Loaded 199051336 bytes successfully.
Checking digital signature....
[mem:/cat4500es8-firmware]
Digitally Signed Release Software with key version A
Couldn't find proper FPGAs in the firmware package
Failed to program FPGA
ERROR: Failed to program FPGAs
***********************************************************************************************************************************
I trying to run software ver cat4500es8-universal.SSA.03.07.00.E.244.152-3.2.44.E.bin. I read information regarding the Rommon version. well I tried to upgrade to version: cat4500-e-ios-promupgrade-151-1r-SG4
rommon 11 >boot tftp://192.168.0.130/cat4500-e-ios-promupgrade-151-1r-SG4
Link Speed : 1Gb Full Duplex
Filename : /cat4500-e-ios-promupgrade-151-1r-SG4
IpAddress : 192.168.0.249
TftpServer : 192.168.0.130
TftpBlkSize : 1468
*
File Size : 621504
MD5 : f274f01f497ace820db566561adced27
Checking digital signature....
[tftp://192.168.0.130/cat4500-e-ios-promupgrade-151-1r-SG4]
Digitally Signed Release Software with key version A
Loaded 621504 bytes successfully.
Unknown system!!!!À
DDR: 4G P
CISCO SYSTEMS
Verifying FPGA (P) Signature ....................... PASSED
Verifying ROMMON (P) Signature ......... PASSED
#####
# # # #### #### ####
# # # # # # #
# # #### # # #
# # # # # #
# # # # # # # # #
##### # #### #### ####
######
# # ###### ##### # # ####
# # # # # # # #
# # ##### ##### # # # ###
# # # # # # # # #
###### ###### ##### #### ####
# # ###### ##### #### # #### # #
# # # # # # # # # ## #
# # ##### ##### #### # # # # # #
# # # # # # # # # # # #
# ###### # # #### # #### # ##
************************************************************
* *
* Rom Monitor *
* Copyright (c) 2012-2015 by cisco Systems, Inc. *
* All rights reserved. *
* *
************************************************************
Rom Monitor (P) Version 15.1(1r)SG(0.046)
Compiled Thu 10-Sep-15 14:33 [RLS]
System : WS-X45-SUP8L-E Slot [1]
Chassis : WS-C4503*E
Revision : CPU 2.1 BOARD 2.0 FPGA 4.3571.7DC7
Memory : 4096 MB
Date : Wed Jul 26 21:50:41 2000
MacAddress : 6c-20-56-d5-a1-75
IpAddress : 192.168.0.249
NetMask : 255.255.255.0
Gateway : 192.168.0.1
TftpServer : 10.1.1.1
Link Speed : 1Gb Full Duplex
rommon 0 >boot tftp://192.168.0.130/cat4500es8-universalk9.SPA.03.06.00.E.152-2.E.bin
Link Speed : 1Gb Full Duplex
Filename : /cat4500es8-universalk9.SPA.03.06.00.E.152-2.E.bin
IpAddress : 192.168.0.249
TftpServer : 192.168.0.130
TftpBlkSize : 1468
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*
File Size : 199051336
MD5 : a32df24fdfc54776f20d83c092f24496
Loaded 199051336 bytes successfully.
Checking digital signature....
[mem:/cat4500es8-firmware]
Digitally Signed Release Software with key version A
Couldn't find proper FPGAs in the firmware package
Failed to program FPGA
ERROR: Failed to program FPGAs
05-18-2016 07:45 PM
was this SUP working earlier?
how did it run into this state?
can you try using the 3.3 version?
if this is a new upgrade attempt to 3.6 version, i guess you should upgrade the Rommon first.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_32143-01.html#pgfId-2685250
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide