cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
6318
Views
5
Helpful
8
Replies
janvandek
Beginner

WS-X6148E-GE-45AT and SUP2T-10G supervisor in 650x-E chassis

Dear,

Cisco announced EOL for ws-x6148A-GE-45AF linecard and proposed WS-X6148E-GE-45AT. However this card seems not to be supported by the SUP2T-10G supervisor.  Which alternative card should I take for this EOL linecard, or can I use the proposed linecard (use extra daughtercard DFC4)?

For short: I'm looking for an alternative linecard for the 650x-E chassis with Supervisor 2T iso 6148-GE-45AF

Thanks

Jan

8 REPLIES 8
Matthew Blanshard
Cisco Employee

WS-X6148E-GE-45AT is supported with Sup2T. 

-Matt

Thx Matt,

FYI

It seems that in the pdf data_sheet_c78-648214.pdf Table 5 one forgot the 45 indication in the linecard code:

WS-X6148E-GE-AT  => WS-X6148E-GE-45AT.

Leo Laohoo
VIP Community Legend

It's a "document bug".  On the lower left-hand corner of the page is a "Feedback" link.  Post your complaint.  The document people will respond to you in 4 hours. 

I filed CSCty92545 to get the data sheet updated.

-Matt

I filed CSCty92545 to get the data sheet updated.

Or one could ask their friend Cisco "contact" and they can do it without even batting an eyelash.

The bug addresses the lack of sup 2t on the ethernet modules page which has the 6148E module and every other sup but not the 2t. 

-Matt

Thanks Matt. 

WS-X6148E-GE-45AT Line card does not compitable with VS-S2T-10G/VS-S2T-10G-XL/VS-S720-10G-3C/VS-S720-10G-3CXL.So i would like to know that this line card works which type of superviosr engine..?