WS-X6148E-GE-45AT and SUP2T-10G supervisor in 650x-E chassis

[janvandek]

Dear,

Cisco announced EOL for ws-x6148A-GE-45AF linecard and proposed WS-X6148E-GE-45AT. However this card seems not to be supported by the SUP2T-10G supervisor.  Which alternative card should I take for this EOL linecard, or can I use the proposed linecard (use extra daughtercard DFC4)?

For short: I'm looking for an alternative linecard for the 650x-E chassis with Supervisor 2T iso 6148-GE-45AF

Thanks

Jan

[Matthew Blanshard]

WS-X6148E-GE-45AT is supported with Sup2T. 

-Matt

[janvandek]

Thx Matt,

FYI

It seems that in the pdf data_sheet_c78-648214.pdf Table 5 one forgot the 45 indication in the linecard code:

WS-X6148E-GE-AT  => WS-X6148E-GE-45AT.

[Leo Laohoo]

It's a "document bug".  On the lower left-hand corner of the page is a "Feedback" link.  Post your complaint.  The document people will respond to you in 4 hours. 

[Matthew Blanshard]

I filed CSCty92545 to get the data sheet updated.

-Matt

[Leo Laohoo]

I filed CSCty92545 to get the data sheet updated.

Or one could ask their friend Cisco "contact" and they can do it without even batting an eyelash.

[Matthew Blanshard]

The bug addresses the lack of sup 2t on the ethernet modules page which has the 6148E module and every other sup but not the 2t. 

-Matt

[Leo Laohoo]

Thanks Matt. 

[prakash medisetti]

WS-X6148E-GE-45AT Line card does not compitable with VS-S2T-10G/VS-S2T-10G-XL/VS-S720-10G-3C/VS-S720-10G-3CXL.So i would like to know that this line card works which type of superviosr engine..?