03-06-2011 11:26 PM - edited 03-06-2019 03:55 PM
I have WS-C6509-E with WS-X6708-10GE installed, i noticed that my asic-1 & 2 temperature is reaching to 65C. Can anyone give me some document what is the normal temparature for ASIC.
module 8:
module 8 power-output-fail: OK
module 8 outlet temperature: 44C
module 8 inlet temperature: 32C
module 8 aux-1 temperature: 45C
module 8 aux-2 temperature: 42C
module 8 asic-1 temperature: 65C
module 8 asic-2 temperature: 64C
module 8 EARL outlet temperature: 36C
module 8 EARL inlet temperature: 33C
WS-C6509-E-FAN
WS-C6509-E
WS-X6708-10GE
03-10-2011 11:59 AM
Hi,
Take a look at the out put of "show idprom module 8 detail"
Specifically, take a look at the 'sensor auxiliary block' section, sensor No. 0 is for ASIC1 and No. 1 is for ASIC2.
The temperatures of the ASIC will operate up to 127C.
Hope that helps,
Nelson
12-16-2013 06:33 AM
Can you please provide the link you're getting this information from? I just need a reference so I can show the monitoring team. thanks
12-17-2013 06:24 AM
Thanks. That does help
07-14-2011 06:47 AM
I have ws-x6708-10ge.
The tempature of the asic -1 is 78C.
It is OK???
07-15-2011 05:33 PM
Oded,
Yes, this is OK. The temperature being measured there is inside the ASIC itself, and so we expect these to be much higher than the sensors that are on the baseboard.
Thanks,
Scott H
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide