cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
332
Views
0
Helpful
2
Replies
Olle Johansson
Beginner

WS-X6716-10G-3C local switching

Hi!

Today I have all 16 ports connected. 8 of them peaks on 2Gbit/sec.

The other 4 is dived into 2 port-channels an both portchannels are peking on approx 10Gbit/s at the same time (backup data dat goes from one end to another)

Port-channel 1 goes to ports Te1/1 and Te1/5

Port-channel 2 goes to ports Te1/9 and Te1/16

So all 4 high dens ports goes to one asic each, and one port-channel goes to on fabric channel each.

So when trafic is flowing from po1 to po2, will it go via the asics only or will it go via the switch fabric?

Regards Olle Johansson

1 ACCEPTED SOLUTION

Accepted Solutions
Jon Marshall
Hall of Fame Guru

Olle

So when trafic is flowing from po1 to po2, will it go via the asics only or will it go via the switch fabric?

In your example it should be switched locally ie. use the fabric asics.

Jon

View solution in original post

2 REPLIES 2
Jon Marshall
Hall of Fame Guru

Olle

So when trafic is flowing from po1 to po2, will it go via the asics only or will it go via the switch fabric?

In your example it should be switched locally ie. use the fabric asics.

Jon

View solution in original post

Thank you!