Tag: "busy_tone" in "Collaboration Knowledge Base" - Cisco Community

Latest Tagged

In the Cisco CallManager Express environment, busy tone is not detected when a call is made to an e... - ( ‎06-22-2009 04:03 PM )

by on

0 Comments 1581 Views

0 Comments

1581 Views

The FXS ports on the VG224 Voice Gateway do not go off-hook, which results in a fast busy tone - ( ‎06-22-2009 06:16 PM )

by on

0 Comments 5421 Views

0 Comments

5421 Views

A Cisco IP phone user does not hear busy tones, disconnect tones or announcement messages when the u... - ( ‎07-22-2009 06:06 AM )

by on

0 Comments 4466 Views

0 Comments

4466 Views

User receives reorder tone as soon as the called party goes off hook due to a codec mismatch - ( ‎06-22-2009 04:12 PM )

by on

0 Comments 1771 Views

0 Comments

1771 Views

How to set the Call Forward All feature on non-primary lines from the physical phone - ( ‎06-22-2009 04:44 PM )

by on

0 Comments 2971 Views

0 Comments

2971 Views

Call Forward Busy alternates between the busy signal and second line - ( ‎06-22-2009 05:01 PM )

by on

0 Comments 1161 Views

0 Comments

1161 Views

User does not hear a busy tone when a PSTN call is terminated on a Cisco voice gateway - ( ‎06-22-2009 05:04 PM )

by on

0 Comments 2640 Views

0 Comments

2640 Views

An AS5400 IOS voice gateway sends two Progress Indicators (PIs) to the TDM switch, causing a call fa... - ( ‎06-22-2009 05:07 PM )

by on

0 Comments 881 Views

0 Comments

881 Views

Calls to IP phones across an Inter-Cluster Trunk fail with a reorder tone or busy tone - ( ‎06-18-2009 04:00 PM )

by on

0 Comments 4737 Views

0 Comments

4737 Views

Calls placed through the gateway have no busy tone or outside dialing messages - ( ‎06-22-2009 05:29 PM )

by on

0 Comments 916 Views

0 Comments

916 Views

Top Tagged

When a call is placed through the PRI of a SIP IOS Gateway, some calls drop while the call transfers... - ( ‎06-22-2009 06:14 PM )

by on

0 Comments 1577 Views

0 Comments

1577 Views

When a call is initiated from Cisco CallManager 5.x through a SIP Trunk to Cisco CallManager Express... - ( ‎06-22-2009 06:08 PM )

by on

0 Comments 1336 Views

0 Comments

1336 Views

No ringback tone or busy tone sounds when a Cisco CallManager Express phone forwards calls to a Cisc... - ( ‎06-22-2009 06:06 PM )

by on

0 Comments 2987 Views

0 Comments

2987 Views

A re-order or busy tone sounds when the Attendant Console Pilot Point is called - ( ‎06-22-2009 06:06 PM )

by on

0 Comments 1267 Views

0 Comments

1267 Views

In Cisco CallManager 4.x connected through E1 to 3845 router, which is used as a gateway, when an IP... - ( ‎06-22-2009 06:05 PM )

by on

0 Comments 963 Views

0 Comments

963 Views

After an unexpected reset of the Cisco CallManager service, in Cisco CallManager 4.x with MGCP, one ... - ( ‎06-22-2009 05:40 PM )

by on

0 Comments 1207 Views

0 Comments

1207 Views

After changing the DN on the VG 224 MGCP port, all incoming and outgoing calls get a fast busy - ( ‎06-22-2009 05:40 PM )

by on

0 Comments 1590 Views

0 Comments

1590 Views

A busy tone is received when the user calls across a gateway over a dial peer with a default codec - ( ‎06-22-2009 05:39 PM )

by on

0 Comments 3219 Views

0 Comments

3219 Views

In Cisco CallManager 4.x, the Call Forward All fails with the "Error Database" error message and the... - ( ‎06-22-2009 03:38 PM )

by on

0 Comments 2729 Views

0 Comments

2729 Views

Conference Connection is set up and a conference is scheduled, the user calls the conference directo... - ( ‎06-22-2009 05:33 PM )

by on

0 Comments 843 Views

0 Comments

843 Views

Top Taggers

User

Count