We are planning to migrate from 5508 to 9800. So I'm trying to use the converter provided by cisco, has anyone tried it? I wonder if it's converted properly.
Hi Team,Users in my network are receiving bad IP addresses, and our DHCP scope is set up on a Microsoft Windows Server.Please assist me in resolving this issue and let me know if you need any information from my side.
Hi there,I am using packet tracer and I have an issue with area A talking to area B or area B to area ACloud is configured to use modem4 to Ethernet6Server has DHCP on and can talk to router and other PC in area A but not area BArea A inside IP is: 1...
Hi,I've deployed a LAB with SD-WAN 20.11.1 (vManage,vSmart and vBond are all 20.11.1) - the controllers connected on the same VLAN/Network.when I add vBond and vSmart over the GUI - I see that the communication is working because when I use the CSR o...
Hello Community,I have never worked with Cisco APs before and I have just come across two Cisco AIR-AP2802E-E-K9 access points.I would like to use them privately.The devices are currently running the Lightwight variant, as they were apparently previo...
I checked the following document and found that “ACLs cannot be configured on management ports.” but we confirmed that it is possible to configure it on the actual device at Is this an error?interface GigabitEthernet0/0 ip access-group 111 in ip acce...
Single Sign-On (SSO) is now a critical element for modern organizations, effectively balancing seamless user access with strong security. As a leader in Network Detection and Response (NDR), Secure Network Analytics (SNA) offers integration with a ra...
Hi,I've got a cisco unified call manager 6.x, and whilst for internal calls I'm getting a display of a display name on our phones (7941G/7961G), for external calls (where caller-id is presented), no display name is there - even for numbers which are ...
When i open my CUCM using GUI there are 'WARNING: DNS Unreacahble'. Actually when i try ping using name via CLI the cucm can resolve the name. How we can fix gui warning or is there any command to ignore that warning?
Catalyst Center version 2.3.7.9-70301System > Settings > Cisco Accounts > PnP Connect allows us to select a Smart Account and Virtual Account (DEFAULT is our only option) but then errors when we try to complete the registration."Failed to register th...
I am trying to do some lab testing, and have deployed ISE and Windows AD. They are Proxmox guest VMs, configured on the same subnet and on the same host. Server is 2025 version, ISE is 3.4.0.608. The user I am authenticating with is a domain and ent...
I recently got my hands on a Cisco C240 M4SX with 24 drive bays. It’s equipped with a Cisco 12G SAS Modular RAID Controller, but I’ve run into an issue I can’t seem to solve.From what I’ve read, using a non-Cisco PCIe adapter causes the system fans t...
Recently need to upgrade C9407 Current version: 16.12.03aTarget version: 17.9.6a Supervisor 1 XL Module with 25G FW: 16.12.2rCPLD: 19032905 Two 9407 SVL units---Can't find the upgrade path in official documentation?Can we upgrade directly from 16.12...
