Technology and Support

Onprem to vmware migration

Hi all, Does below license justifies/required for migration of email security from onprem to vmware. Pfa snapshot. license name- Cisco Secure Email Xaas Subscription

Cisco SFP-10G-LRM module

Is the Cisco SFP-10G-LRM module compatible with OS3 fiber?

Duo Single Sign-On for Cisco ASA and FTD with AnyConnect

Hi All, Can we use Azure AD as a Primary authentication for Duo Single Sign-On for Cisco ASA and FTD with AnyConnect. Also let me know where we can Entra ID as the authentication source for SSO

Trunking an ip addressed inside interface on Firepower 2130

My network endpoints use the IP addressed vlans on my core cisco layer three core switch as their gateway addresses. i.e.- vlan 11 endpoint address 192.168.11.3/24 with gateway 192.168.11.1/24 (vlan ip on core) and vlan 12 endpoint address 192.168.12...

Question with NSO and CARE

Question for anyone who used NSO with CARE to automate STIGs.So we had call yesterday with a few guys from Cisco to discuss us potentially ordering Cisco NSO. The main reason for purchasing is to use their CARE product which will allow us to automate...

AAA question: enabling the device to allow user- or group-based access

CCNA study question. is enabling the device to allow user- or group-based access Authentication or Authorization?thanks

CUC - Voicemail To Email notifications

Hi, I had a staff member call today. he said his phone had the Voice Mail message light, but no message. But he did have an email message from Unity with the voice message attached(We are using Unified Messaging Accounts for this user. If the user pl...

Integrate ACI Simulator with vmware VCA using Mgmt Tenanant using the

Hi FreindsI Heard that u can Integrate ACI Simulator with vmware VCA using Mgmt Tenanant using the the Mgmt IPs for both ! so that you can push PG to VC and Play Around , any walk around Thanks

Removing Device Pack file from Prime Infrastructure

Hello.On the Software Update page of Prime there is one Pack which i can not install or delete because it is already included in another installation i did before. Now this pack stays on the page and i am not able to remove it. Does anybody know wher...

Allow Agent to respond to ping

Allow the cx cloud agent to respond to ping. Just basic reachability troubleshooting seems like a basic feature.

FTD re-register to FMC chassis mode

Deployed a 3100 in chassis mode to the FMC a few days ago. All went to plan.Determined we needed to change the IP so decided just to delete the device from FMC and re-provision it.On the FTD via local-mgmt did a erase configuration. The device wiped ...

Cisco ISE 3.2 OVA instable crashes

Hi Everyone,Cisco ISE 3.2 keeps crashing several days after the installation.The installation has been done successfully without any problems.After a couple of days the installation is malfunctioning.After several installations and change of the sel...

AnyConnect DNS Issue

We are having an issue were after disconnecting from AnyConnect and connecting the next day, they get a new IP in AnyConnect but in our local DNS they have another IP which I assume is probably from the day before. This obviously causing name resolut...

IP Access-Group on switchport - Cisco C1111 ISR Router

Hi all.I am attempting to add an access group to a switch port which is located in a C1111 ISR router but the command is no longer there when using version c1100-universalk9.17.06.03a.SPA.binMy-Router(config-if)#ip a?admission arp auth-proxy*******...

Ask Me Anything - Drive to 15X

Ask Me Anything Forum - Drive to 15X Welcome to the Cisco Support Community Ask Me Anything discussion! Are you considering upgrading or migrating your UC applications to version 15.x, such as CUCM, CUC, IM&P? If you're looking to learn more about...