Activity in Technology and Support
ISE API cost
Someone said the ISE API costs money, but I was wondering if someone could break down how the cost works.Is it just pxGrid and OpenAPI that aren’t charged?
Cisco ISE 3.5 Entra ID Authorization Not working
If Entra ID External Group is part of Authorization Rule, 802.1x ( EAP-TLS ) is not working with Device Cert. But if I take out External Device Group from Condition , 802.1x - EAP-TLS is working. I have successfully Integrated Entra ID Integration ...
Cisco Secure Access for Government Release Notes 10/2025
Secure Access for Government Release Notes (10/2025) Secure Access for Government is a FedRAMP Moderate [IL2] authorized instance of Cisco Secure Access, purpose-built to meet public sector requirements and compliance needs. Secure Access for Governm...
FlexVPN with Anyconnect key-id change
hello and good afternoon to all. have a question regarding FlexVPN using Anyconnect. everything is working great but, i need to make different groups and since anyconnect key-id is *$AnyConnectClient$*by default i have seen information regarding that...
Vmanage API - Preview configuration and config diff
Hello,I am working on an automation to have a device moved to a different device template. Before moving it, I need preview the configuration and compare the difference between the existing and new configuration. So I tried searching for a config dif...
NSO Basic DNS Service failing ''Container' object has no attribute"
Hi all,I hope someone can show me the obvious mistake i'm making.I am following this https://developer.cisco.com/docs/nso-guides-5.7/creating-a-service/#creating-a-service to create a basic DNS service.Whenever i issue a "commit dry-run" i get this e...
How to add a subnet coming through a VPN to an ACP
Hi to all,my topology is like the following:subnet A --> R1 <-----Internet--> Edge Router <----> FTD<---> Various VLANs in the inside ZoneBetween R1 and FTD runs an IPSec VPN. Internet connectivity is provided by the Edge router. What is not clear to...
Expressway cluster throwing weird error
Expressway cluster built on version 15.2.4. Operating, but throwing a weird error: Cluster peer 1 is specified as configuration primary, but for the replication to work properly peer 2 should be specified as configuration primary I have tor...
Unable to Direct Upgrade CUCM 14 to CUCM 15
Current Version: CUCM 14.0.1.12900-161Trying to upgrade to: CUCM 15.0.1.13901-2 and also tried CUCM 15.0.1.10000-32I am trying to upgrade CUCM 14 to CUCM 15, every time I try the update it fails with "/usr/local/platform/conf/platformConfig.xml field...
Resolved! Ftd osp/bgp
Hello, am abit new to Firepower configuration.. We have two ftd instances, one as campus and another as perimeter, both managed from fmc. The the two instances share routes via ospf peering, and bgp retribution also configured.The problem am facing i...
Fault Code F0053 - Exports failing
Hello,we are currently using the ACI Simulator (v6.1(4h)) and are encountering an issue with configuration exports.After creating an export policy, we are initially able to perform a few exports successfully. However, after some time (without making ...
hunt line -ms teams
HiA CUCM-to-SBC (Ribbon) trunk has been configured where any number matching the 8XXXX pattern is routed to the SBC and then to Teams. The directory numbers 87401, 87402, and 87403 have been added, and the SBC is set to discard the leading “8.”When d...
Regarding Xlate info in ASA
generally , in one static 1 to 1 NAT the output of show xlate shows as below right .ham-vpn-fw/ham-vpn-fw# sh xlate | in 172.20.164.139 NAT from outside:10.90.0.18 to cbtsmgmt:172.20.164.139 ham-vpn-fw/ham-vpn-fw#but in one of my case showing as bel...
Cisco UBE (CUBE) Connected to CUCM and Teams Call drops (static)
Cisco UBE (CUBE) Connected to CUCM and Teams Call drops and goes to static from PTSNCalls from outside (PTSN) to CUBE to Teams drop after ring and replaced with Static noise. Anyone seen this before. We have 2 CUBEs and it was only affecting producti...
Is it possible to call a VXML application using a task from webex conn
Is it possible to call a VXML application using a task from webex connect? Flow is like Email flow from webex connect --> CCE create task node -->CCE DN --> CCE calltype --> ICM script --> Run external script node to call VXML application ( which wi...
| User | Helpful Count |
|---|---|
| 87 | |
| 60 | |
| 49 | |
| 48 | |
| 45 |
