Activity in Technology and Support
ios downloded
I wanted downloded the Catalyst Express 500 firmware
Cisco Prime 3.10 AP's not adding even though WLC is added.
I've got the WLC added via SNMP without any issues, but for some reason, the AP's are not populating. The AP's are a mix of 9176, 2802, & 3802's. The VLAN has been discovered in Prime, Not sure what is missing or what might be causing the AP's to n...
CSCwo01365 - Unexpected reboot produced due to SNMP IE3000 platforms
FYI: We were running 17.12.3 when we were hit by this bug.
8841 Amplified Handset/Headset
Can anyone recommend an amplified handset or headset you've successfully used on 8841? TIA!
VG410 SIP Line Registration with CUCM
Hi, I have a customer with CUCM 14SU1 who have deployed three VG410 gateways. As the CUCM version does not support the VG410 in the gateways drop down list with any protocol (SIP, MGCP or SCCP) I configured a SIP trunk and Route Patterns on CUCM and ...
Building a Personal NSO AI Assistant with NSO Gitbook to RAG Converter
NSO is a powerful and sophisticated orchestration platform designed to simplify and optimize network operations. While it may seem complex at first glance and requires some effort to master, its capabilities bring significant long-term benefits for...
Looking for best solution for wireless connection
Hey all. I work in a warehouse and we have 18 APs all connected to an AIR-CT3504-K9 controller. We have one spot within our warehouse where we have some PCs that are between a modular office and the bathrooms. The ceiling is really high up (maybe ...
Import certificate for secure logging
We are trying to configure secure logging using TLS for our edge routers, we need to import the certificate to be used but I cannot see the terminal option in the trustpoint enrollment section. We also tried converting the certificate to pkcs12 forma...
CSCwq55757 - NFNIC PSOD on 5.0.0.46 - fnic_abort_cmd
Hi community,This is an bug on Cisco that it's crashing bladese with PSOD about nfnic and it hasn't workaround or fixes. That a uncomfortable situation because of we finished recently the upgrade to Esxi 8.0.3u and it's appear .....
CSCwp83205 - C8300-1N1S-6T fail to upgrade in install mode
Trying to upgrade C8300-1N1S-6T from Cisco IOS XE Software, Version 17.12.03 to recommended Cisco IOS XE Software, Version 17.12.06 I was able to submit "install add file ....." and "install activate" commands, after the router reloaded it was no lon...
C8200L-1N-4T and NIM-2FXSP (Voice)
Hi team, I have a device: C8200L-1N-4T and NIM-2FXSP. I want to "show voice port" on CLI but it's doesn't work. I haved show the commands "show inventory" and confirmed that the NIM-2FXS module is detected, so why am I unable to run the show voice po...
Python version used in Nexus 9000 ACI-Mode
Background: Recently an internal vulnerability scan was run at a client for compliance purposes and the Nexus switches (ACI-Mode) show up with vulnerabilities because of "Python Unsupported Version Detection". They're currently running 16.0(4d), si...
cisco ISR 927 router dual ISP configuration issue
dualstatic Hello, We have a dual ISP setup on a Cisco 927 using FTTP (primary) and SoGEA (secondary), both via PPPoE and controlled by IP SLA/Route Map.When FTTP is active, the SoGEA connection becomes unreachable, preventing proactive monitoring of ...
IE-3100 "IP default-gateway" disappears after a power reboot.
Hello everyone, I have several Cisco IE-3100 switches that lose part of their configuration after a power cycle. The switches lose the following configuration line: ip default-gateway. I have to log in to the switch console to re-enter the command:...
find access-lists assigned to Interfaces
Hello,we have a lot of Cisco switches many in stacks with a lot interfaces. I overtake the stuff from a College witch has left. I see there are some access-lists created but I won´t to know on which Interface there are assigned. I can run "show run" ...
| User | Helpful Count |
|---|---|
| 91 | |
| 56 | |
| 55 | |
| 52 | |
| 43 |
