Activity in Technology and Support
Monitored users on 9861
All, Upgraded from 8851 to 9861 and cannot figure out how to get to the monitored users (busy lamp) when transferring a call. On the 8800 series, you'd press up on the navigation cluster, and it would show your monitored list. Now it looks like you ...
CSCwi62683 - CVE-2023-48795
Has this been addressed in FMC and FTD 7.6.2? My scanners say I am still vulnerable.
Trouble adding ISE server in Network Settings
Hello all,I'm doing the CCIE Practice Labs so I can get practice with SDA. One of the first things I'm doing in SDA is the integration of DNAC with ISE (in the lab, the DNAC is version 2.3.5). The integration works fine, and during the integration I ...
Resolved! Unable to add 2960X to Stack. Stack Ports Showing Down
Hello, I'm REALLY baffled at why a 2960X is not being added to our stack. I matched the new member's IOS to what the stack had. The sdm prefer settings match. The licenses both show lanbase. Yet, both the stack and and the new member show stack ports...
Microsoft NPS Radius for Switch Authenticate and Authorization
Is the following even possible? I would like to configure Microsoft NPS to act as a Radius Server to authenticate and allow users who are present in one of two active directory OU's (OU #1 & OU I#2) to ssh into the device and then if the user is in O...
Passwordless lets you in even if AD creds are locked out
Hi We are having some issues with a FTD VPN setup where we get certain errors after authenticating but in trying again it lets you in. I have a case open with Cisco but they are very slow to respond. We found that if the user locks out their account...
Resolved! Return traffic to a source NAT IP works sometimes- L3out /ServiceGraph
Odd one here - traffic works for SOME of the source NAT IPs, but not others.If we stop traffic to from one source NAT IP for period of time (few hours) it never works again.Source is uEPG in VRF1.Destination is a handful of customer owned devices tha...
always NDO loses NTP Sync with NTP Server WS3750-X
Hello Freindspls see below , NTP Issue between NDO and NTP Server, always NDO loses NTP Sync with NTP Server ( WS3750-X) critical] Node[ips-ndo-01] Health Check 'ntp' failed. Status: "The NTP server 172.16.100.254 is not healthy, status: Unknown err...
vNDO 4.1.1g get to the software image after dissociating from NTP for
Hello Freinds vNDO 4.1.1g get to the software image after dissociating from NTP for whatever reason, is there any methode to prevent it for NTP Check after the successful installation rescue-user@NDO-3:~$ acs health======Status======[critical] Node[...
D331 Duo Release Notes for December 19, 2025
Hello everyone! Here are the release notes for our most recent updates to Duo. This will be our last release update for the year. We’ll see you again in January 2026. Public release notes are published on the Customer Community every other Friday, th...
Dual WAN [Independent] on ISRC1111 connected to 3850 Switch; No Intrnt
Hello I had trtied to apply this scenario to my FPR1010 but either due to lack of understand or simply did not fit my needs, I decided the FPR1010 was a Firewall {obviously) and decided to let it be such and work on the ISRC1111. What I have posted b...
Resolved! CSCws06332-SDA Fabric Zones have different Anycast GW MAC addr
Is there any Permanent Fix for this defect? @rcongani @pabest
Resolved! Some 3850 switch ports are automatically reverting changes?
I've found 4 switchports on two switches in our environment that are automatically reverting changes that are made to them. In this case, I'm attempting to simply change the assigned VLAN of the switchport and then bounce the port. When I look at th...
Impact of Using EOL/EoW Unmanaged Switches on Network Stability
Hello Cisco Community Team,I would like to seek expert guidance regarding a network design concern we currently have.Current Network Scenario:We have a firewall connected to multiple ISPs handling internet security and routing.Downstream of the firew...
C1200-48P-4G dynamic vlan assignment via radius
Hi! I have tried hard and long to get an C1200-48P-4G switch with 802.1x config to assing a vlan dynamicly via radius when an interface is authorized! I can not get this to work. The only way to set vlan on client is to set it directly on the interfa...
| User | Helpful Count |
|---|---|
| 66 | |
| 48 | |
| 46 | |
| 44 | |
| 34 |
| User | Count |
|---|---|
| 28 | |
| 18 | |
| 13 | |
| 13 | |
| 11 |
