Activity in Technology and Support
Active accounts are being displayed as Inactive?
Can anyone explain why an active account would be listed as having an Inactive status? These are accounts with a recent logon and authentication including successful DUO pushes. It's making it difficult to track those accounts that are actually Inact...
Fan noise of 350x-24
Dear all,I just received a 350x-24. The fan is quite loud, but that isn't a problem as no one sits beside the rack.I just wondered if a noise of 49.2dB average is normal or if it is a indiaction for a hardware or config problem?The noise level was ju...
Cisco WLC upgrade
Hello! I have configured WLC with software version 8.8.130.0. To which version is it recommended to upgrade? Thank you!
Duo Desktop not recognized
Hello, I am using Cisco Anyconnect to connect to VPN. The system is using Duo Desktop for device health. It is already installed, running and all the checks are ok. However, I am getting this error message and not able to proceed: Install Duo Desktop...
Resolved! VLSM with Inter-VLAN routing
Hello,Studying for my CCNA and I thought I'd practice some basic configurations, such as router on a stick. I setup 4 PC's (each representing an imaginary number of hosts) each with a vlan attached to a switch leading to a router, with the link betwe...
IOS-XRv 9000 unreachable from non-local network
I have a IOS-XRv 9000 with SSH and gRPC enabled, running on the latest version of CML. gRPC is not working from a remote network?
QuickBook_s +1-888-408-4362 Enterprise Support Number
If you're seeking assistance with QuickBook_s Enterprise, their support team is just a call away at +1-888-408-4362. Whether you're troubleshooting issues, setting up your software, or exploring its features, their dedicated support staff is ready to...
ise appliance migration from 35xx to 37xx
Hai All can any one please give best practices for below deployment customer has Cisco ISE 3515 running on 2.7 which is EOL/EOS we Proposed new 3715 model. For configuration migration suggestions.
Resolved! Azure SAML SSO Certificate Error, Firepower 1010
Hi, We are trying to implement Azure SAML SSO on our Firepower 1010. We are using ASA 9.19.1 and Secure client 5.0.02075. When we try the login via Azure by clicking the "Test this applicaton" the login works and there are no errors in the logs. The ...
Cisco ISE 3.2 OVA instable crashes
Hi Everyone,Cisco ISE 3.2 keeps crashing several days after the installation.The installation has been done successfully without any problems.After a couple of days the installation is malfunctioning.After several installations and change of the sel...
Resolved! FTDv managed by FMC ntp issue
Hi,I'm using FTDv 7 managed by FMC v7. Logging issues are there and there is an error about FTD not synced.So, first step seems to solve the ntp issues. FMC GUI is there for ntp which I set and it seems to be ok, but I cannot find where is the ntp se...
FMCv 7.2.5.1: High CPU load - how to troubleshoot?
Hello everybody,our customer has a FMCv running sugg. rel. 7.2.5.1 and has a high CPU load of approx. 97%.(see attached screen dump).The VM has 4 CPUs, 32GB RAM and 250GB HDD.The FMC is managing a HA of two Firepower 1120 running rel. 7.2.5.A FMC reb...
Delete a decommissioned (and phys. removed) server - fails
I just wanted to clean up * decommissioned and * physically removed blade servers by * selecting one and pressing ["Delete"] at the bottom as usual from the inventory. But UCSM fails: "Operation is not permitted" Any Idea how to overcome this?
Resolved! File not found UCCX Custom File
Hi, we use a custom file in /opt/cisco/uccx/document/System that we can read and write from an uccx application with System.getProperty("uccx.customer.dir"). We use the in UCCX Editor the Document steps "Create FIle Document" to get a document variab...
1921 Router Config Help
Hello, I know very little about configuring cisco hardware and need some help..... we are currently running an 1800 router and I obtained a new to me 1921 router and would like to replace the 1800 router with the newer one, I managed to get it factor...
| User | Helpful Count |
|---|---|
| 113 | |
| 111 | |
| 86 | |
| 64 | |
| 62 |
