Activity in Technology and Support
Adding Algo 8128 devices to Cisco CUCM 12.5
Has anyone tried adding multiple Algo 8182 SIP Strobe devices to their Cisco CUCM 12.5 PBX? I'd like the devices to activate on both "ring" and "in-use" events, but according to Algo that requires the "Subscribe/Notify" dialog event RFC 4235 on the P...
Cisco Secure Client XML overwrite issue
Hello, any help appreciated.I am having issues when trying to assign a different group policy to a user where the group policy contains a different client profile (XML) to the one used to connect in the first instance. This is what I am trying to do....
permit ip ifc outside any any
We have FMC and FTD , In FMC we configured Blocked traffic ACCESS POLICY , but while checking in FTD(CLI) one more ACL( Ifc Outside any any allow) showing with same rule-id 26844160. any ideas how to find this ACL in FMCACL in FTD ========access-li...
Resolved! MTBF for 1000BASE-SX SFP
What is the MTBF for 1000BASE-SX SFP adapters? I have looked through the product documentation/specifications here with no success (the product documentation is pretty weak): https://www.cisco.com/c/en/us/support/interfaces-modules/1000base-sx-sfp/mo...
Cannot add FTD to FMC after deleting it from FMC
Hi,FTD was added and to FMC and while configuring HA in FMC, deleted FTD from FMC.While trying to add again to same FMC, both primary and secondary FTD not getting registered in FMC.Could you please help on getting the FTD registered with FMC.
9800-40
Hi Is there any document that shows that WLC 9800-40 support wifi-6 and 6G band! I cant find that document
Cisco Firepower Access remote site-to-site subnet via Cisco Anyconnect
When a client connect to the HQ via AnyConnect vpn, they can access the HQ local subnet, but can´t access the subnet at the remote office, that has an site-to-site connection to the HQ.Can this be configuret via the Cisco Firepower gui?Cisco Firepowe...
SSL VPN Encryption Type/s?
Hello,When configuring SSL VPN, the default encryption type is "ssl server-version tlsv1.2 dtlsv1.2", which only shows up with a "show run all". In that output, I can also see that "ssl cipher tlsv1.2 medium" and "ssl cipher dtlsv1.2 medium" are disp...
Licensing status ISR 2900 CUBE
Hello,we are stilll using a isr2900 router as a SBC.Currently it uses the securityk9 license and a uck9-cme-srst-cube license as smart licensing.The logging output tells me that the evalution period already expired.I know the product is EOL/EOS but s...
Need some assistance with some basic VLAN/Routing config Cisco 1941.
Hi all I'm setting up a CISCO LAB to keep me busy in my retirement. My Current network consists of a TP-Link Deco mesh network which works well for my IOT, PCs and internet access. I just got hold of a Cisco 1941 router with a EHWIC D8SGP module. ...
Cisco ASA AnyConnect Radius VPN user rx multiple 2FA request instantly
ive just implemented cisco duo for anyconnect on my asa. some users are experiencing getting multiple 2FA requests on their phones back to back instantly sometimes 3 request, my timeout is 60 secs set on the ASA and my max failed attempts is 3. is th...
Clients only connecting 11a/11g
We currently have two 9800 WLCs serving our schools. Their configs are virtually identical. When clients connect to one specific SSID on 9800 A, they'll connect at expected speeds using 11ac or 11n protocols. However, when clients connect to the same...
Lan Automation: What to do with "queued" devices
When i discover a new switch with LAN-automation other switches, which are not directly connected to the specified interface are going into a queued status. Which means:Queued: The device is queued for later processing because it isn’t directly conne...
Perform a Complete Reimage for FXOS in Firepower 4100 and 9300 Series
The Cisco Document Team has posted an article. This document describes how to reformat the entire system, erase the images, and return it to its factory default settings. Know of something that needs documenting? Share a new do...
Configure Administrative Distance for DHCP Routes
The Cisco Document Team has posted an article. This document describes how to configure and verify Administrative Distance (AD) on default routes received via DHCP. Know of something that needs documenting? Share a new document...
| User | Helpful Count |
|---|---|
| 98 | |
| 78 | |
| 73 | |
| 61 | |
| 58 |
