Activity in Technology and Support
NDFC 4.1.1g issues with building multisite VXLAN EVPN Fabric
Hi team, I am trying to test NDFC 4.1.1g but bumped into a strange issue that I haven't experienced before in previous version. This is my lab setup: 4 x n9000v, version 10.4.4M. 2 sites, each site has 2 x n9000v. Configure them as back-to-back...
ISE Deployment patching
HiSix node distributed ISE DeploymentWhats the recommended order to patch fronm cli please.??1.PRI-PAN which is also SEC MNT2.SEC-PAN which is also PRI MNT3.PSNs
Migration of CUBE to New SIP Trunk w/o Authentication
Currently have a SIP trunk that requires authentication w/ ITSP. My sip-ua section is as follows: sip-ua credentials number AAAAAA username AAAAAA password 7 mypassword2 realm myitsp.net authentication username AAAAAA password 7 mypassword retry i...
Issue with SVI routing on Nexus 9300
Hi All,Anyone have more information on why the SVI routing on L2 port is not working on a Nexus 9k. Two vlan 20, 30 configured, ping worked on the vlan subnet but will NOT ping to other vlan. The sho route has the correct fib . L3 switch has the d...
Cisco ISR4331 16.6.x can it be configured to use SMART licensing?
Cisco ISR4331 16.6.x can it be configured to use SMART licensing without upgrade?If yes, what happens to the existing permanent license on the box? Which features would be used from smart licensing or local perm lic.? e.g. perm. lic supports 500 sess...
how to configure dot1x authentication for VM servers with ISE 3.X
Need to configure dot1x for VM server Machines how we can do with ISE server.
AMA: Master DHCP in SDA & Resolve Tricky Interoperability Issues
Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 18, 2025 through Friday, August 29, 2025. Our colleagues Nausheen Haider and Ramya Nair will be waiting to assist you ...
Windows Search Problem on computers Win11 and Cisco Secure Client
We are experiencing unusual issues with computers running Windows 11 that have Cisco Secure Client 5.1.6.1307 and Secure Endpoint 8.4.5.30483 installed. The problem is that Windows Search suddenly stops working and just keeps spinning without returni...
Resolved! CUCM 14 Reused Certificates are invisible after the upgrade.
Hi Experts,Blessed morning!We have encountered a weird issue when we upgraded our CUCM 14 to 14SU4. The reused certificates were invisible from GUI after the upgrade. We have verified via SSH/OS Admin CLI, that the reused certificates are there.Do yo...
Resolved! C9800 Admin access through GUI with MFA
Hi wireless colleagues, After multiple tries with the configurations I have managed to enable MFA on the C9800 for admin access through CLI by using TACACS+. The integration is done via ISE with NPS as Proxy RADIUS to Entra ID MFA Service in the clou...
CUC Call Handler Extension
CUC Call Handler Extension / Menu Options/ several have Pilot numbers to in CUCM for hunt group options. If that call is not answered need to be able to leave message in the Call Handler Extension numberCall Flow Entry Call handler Extension / Select...
Standard ACL Deny Before Permit
Hello, If there is a deny statement at the top of a standard ACL and then there is a permit IP any any at the bottom of the list, would the rules inbetween even be inspected? Here is an example: access-list 7 deny any access-list 84 deny any acc...
Cisco Secure Desktop on FTD
Afternoon, When browsing to the public IP of the FTD managed by FMC, I am being directed to /CACHE/sdesktop/install/start.html and presented with a Cisco Secure Desktop page. Does anyone know this can be disabled and why it is being presented?Regar...
Resolved! Renumbering Switches in a Stack
OK, so I realized the switches in our stack are numbered wrong, with 1 and 2 backwards, and 3 being okay.I wanted to do a "switch 1 renumber 2 command", and got a warning saying "Changing the switch number may result in a configuration change for tha...
AnyConnect VPN Single Sign on error
Hello Cisco Members,I have been struggling with the "Authentication failed due to problem navigating to the single sign-on URL" for a while. I have tried changing my default browser many times and reinstalling the Cisco Secure client multiple times. ...
| User | Helpful Count |
|---|---|
| 177 | |
| 139 | |
| 88 | |
| 74 | |
| 68 |
