Activity in Technology and Support
ise appliance migration from 35xx to 37xx
Hai All can any one please give best practices for below deployment customer has Cisco ISE 3515 running on 2.7 which is EOL/EOS we Proposed new 3715 model. For configuration migration suggestions.
migrate policies from SMA
Is it possible to migrate policies and its dependencies alone from am SMA to another. Since both SMA are running different version backup restore is not working.
SR-TE
Hi @Harold Ritter ,I am sorry to ask questions on SR-TE. Whenever i observe any issue in Segment routing , only your name comes to my mind as you helped me earlier on Segment routing related issue. Thanks a lot for that. Now i come up with differe...
What does "2 Gigabit Ethernet combo + 2 SFP" mean in this context?
I think that it means 2 ports are support RJ45 and and also SFP. But how can a RJ45 support SFP?
CISCO WSA upgrade alert error
We have upgraded our S1000v(wsa ) from 14.5.1 to 14.5.2 and upgrade was successful but when we checked the alerts we found an alerts as An application fault occurred: ('heimdall/svc.py send_command|195', "<class 'heimdall.exceptions.unknownprocess'="...
Delete a decommissioned (and phys. removed) server - fails
I just wanted to clean up * decommissioned and * physically removed blade servers by * selecting one and pressing ["Delete"] at the bottom as usual from the inventory. But UCSM fails: "Operation is not permitted" Any Idea how to overcome this?
Trustsec Network Authorization not Working
Hi All,I am newly building trustsec in my environment,trying to add one of the switch under trustsec. Have configured Trustsec settings and COA on the ISE for the switch and added the appropriate aaa commands , radius servers and cts commands.But sti...
Cisco Hyperflex cluster installation failed
Hi All, My hyperflex cluster failed with the error "configure Service profile(SP) failed" "Associating Service Profile" during the UCSM configuration in each server but validation was successful. I have 6 nos of hyperflex UCS 240 m5 all-flash nodes a...
JSON Response from REST Client CVP 11.5
Hi Team, I am trying to make a REST call using Call studio REST Client to an endpoint. However, in my json response, i get multiple values. Although, i could see all the responses in the log, my requirement is to utilize only 1 response. As per docu...
Resolved! Cisco Fabric Interconnect is showing six(6) Pmon Services as failed
Cisco Fabric Interconnect is having some Pmon Services as failed ================================================== FI-B(local-mgmt)# show pmon state SERVICE NAME STATE RETRY(MAX) EXITCODE SIGNAL CORE------------ ----- ---------- -------- ------ ----...
Fix empty startup-config for C9200L
For Cisco WS-C9200L-24T-4G-E, a user tried to backup configuration from Web portal. But did wrongly that uploaded empty text file to the device.That is:Copy to devicetftpaaa.txt (created from local computer)startup-configupload to device.Now the star...
how to safely turn off cisco router/switch?
how to safely turn off cisco router/switch?is it just turn off the power switch at the back of router/switchor need to issue soem command in user EXEC mode /privileged mode to shut down the router/switch? explain please, thank you
Redundancy Over VSAT Link
Hi, we have a WAN and VSAT connection to one of the site. WAN is primary and VSAT is secondary link.We have dedicated router for WAN and VSAT. VSAT link is connected to one of the LAN access switch.Could you please help me, what kind of configuration...
Resolved! FTP gets Blocked by Zone-Based Firewall
Hello everyone,I have a problem with an IOS firewall. The thing is that I'm using an FTP client to collect data from the wan (it's on passive mode). The session gets established, through port 21 (wich is on my access-list). I cannot get the transfer ...
Unable to create a building in DNA 2.3.5.5-70026
Hi,we have this fresh install of DNA Center 2.3.5.5-70026. I've been able to create areas using the Intent API but I can't create a building.sitePath = "/dna/intent/api/v1/site" headers = {'content-type': 'application/json'} headers["X-Auth-Token"] =...
| User | Helpful Count |
|---|---|
| 115 | |
| 112 | |
| 85 | |
| 65 | |
| 63 |
