Activity in Technology and Support
Resolved! dns-o-matic ddclient support
HelloI am trying to get ddclient working to update a dns-o-matic account. dns-o-matic recommends the following configurationssl=yes \use=web, web=https://myip.dnsomatic.comserver=updates.dnsomatic.com, \protocol=dyndns2, \login=dnsomatic_username, \p...
Catalyst Center Always-On
Hello Team,I'm trying to gain access to the Catalyst Center Sandbox.As per the set up instructions below.host: https://sandboxdnac2.cisco.comusername: devnetuserpassword: Cisco123!status: OKWhen I add this link in the vpn it's showing that alert,when...
Printer COA vlan Issue
Hello,I am having a weird issue with ISE 3.4 Patch 3. Printers is not getting vlan changed when it is pushed via COA. It clearly shows on the authentication session that it is pushing the correct vlan but the ip did not change and switch to unknow. I...
RESTCONF in catalyst8000 timeout
Hello, I've been trying for several days to make RESTCONF queries to the Catalyst 8000 Always-On (it doesn’t require a VPN), but I’m not getting any response. Do you know what might be happening?I make the following request,curl -k -u "***:***" https...
Resolved! enable dhcpd in ASA5506-X firewall
HiI got an error when trying enable dhcpd on ASA5506-X on packet tracer version 9.0. It works fine in version 8.2.dhcpd address 192.168.1.10-192.168.1.100 INSIDEdhcpd enable INSIDE --> Here I got an error that I have to define ip pool, but I already ...
BGP behavior Firepower <-> Border Node
I 'm currently having a problem with BGP in my lab. For setup 2x Firepower active/standby and 2 border nodes. In between, BGP is configured with redundant paths. In other words, the firewall always has 2 equivalent paths in the BGP table. Graceful Re...
Periodic ESA and SMA configuration file
How can i perform periodic backup for both ESA and SMA without these scripts. https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118403-technote-esa-00.html https://www.cisco.com/c/en/us/support/docs/security/secure-email-ga...
Migration using FMT with different FMC
Hello everyone, I’m currently performing a migration from Cisco ASA with FirePOWER Services (ASA + SFR) to Cisco FTD using the Secure Firewall Migration Tool (version 7.7.10.4), and I’ve run into a limitation that I’m not sure how to properly handle....
Pegging item for reporting in UCCX
Hi all,I'd like to get a CUIC report on a pegging element in my UCCX script that branches off the calls, so I can get a report on how many calls went to that route, say an outbound external number or voicemail.In UCCE, I recall a calltype being used ...
Disable Web Access on CP-8865-K9
Hi team, Is there any way to disable Web Access directly on the CP-8865-K9 IP Phone without going through CUCM?Can you support me ? Thanks team,
Cisco UCS C240 M5 Extremely Noisy – All Six Fans Running at 17RPMs
I have purchased a Cisco UCS C240 M5 server for our office, but due to the extreme noise we have stopped using it.I have already set the “Fan Policy” to Low Power, but it has not made any difference.What could be the reason for the fans running at su...
VPN: Security Warning: Untrusted Server
My reserved sandbox was created successfully but when I try to VPN using AnyConnect from the Windows store, I get a certificate error (Untrusted Server). I turned off Block Untrusted Servers in the AnyConnect settings and I'm still unable to connect...
Resolved! Position of ACL at Router or Switch in Campus LAN Network
Dear Friends I am designing and configuring a Campus LAN Network for my self study. The diagram of Campus Network is attached. My query is where should I configure ACLs to block VLAN40 from accessing Server1 (S1). I have implemented SVI for inter-VL...
Changing LDAP Directory URI field
Hello,by default, CUCM only offers mail and msRTCSIP-primaryuseraddress as LDAP attributes. Is it possible to use a completely different LDAP attribute for synchronization?Thanks,-Sascha
Power calculator tool
Can someone send me URL for Power calculation tool required for power calculation of 4500 switch for number of POE linecards support
| User | Helpful Count |
|---|---|
| 83 | |
| 46 | |
| 42 | |
| 40 | |
| 35 |
