Activity in Technology and Support
DNA cluster joining issue
Dears, I am attempting to join a new node to my existing Cisco DNA Center (Catalyst Center) cluster, but I am blocked by the following error message during the configuration wizard: "There is another node installation in progress. You must co...
Cisco C9300 Link Flapping
Hi there,im configuring a Stack of 4 C9300-48P and now i have the problem that my uplink starts flapping after around 15-20min.im really confused because of this behaviour and im trying to fix it since 3 weeks but it wont work.Im using Flexoptix GBIC...
SD-WAN 20.18 Sandbox Timeline?
Hi DevNetSandbox Team!I see that there are currently sandboxes for SD-WAN versions 20.10 & 20.12 available. In the latest 20.18 version, though, there are major GUI changes. Is there a rough timeline for when a new sandbox will be added with the upda...
Cisco CCE with Google Agent Assist
Dear All, Has anyone implemented Google Agent Assist with the Cisco UCCE 12.6.2 setup. Looking for a few clarifications about this. We have completed all the settings on the Cisco side.( UCCE+CloudConnect+Control Hub). From the Google side, we are un...
Intermittent IPsec Tunnel Hangs – Cisco 8000V (AWS) to Palo Alto
Hi Team,We are experiencing an intermittent IPsec tunnel hang between a Cisco 8000V router hosted on AWS and a Palo Alto firewall.Multiple IPsec tunnels are configured on the same Cisco router and are stable; however, only one tunnel to the Palo Alto...
FMCv 7.4.3 on ESXi 8
Hi all, We currently have our FMCv on version 7.0.8.1, however, looking at upgrading our VMware environment to ESXi 8 so planning to upgrade the FMCv to 7.4.3 first. Is anyone running FMCv 7.4.3 on ESXi 8 and if so have there been any issues I need t...
Resolved! Process of LAN Automation in DNAC
Hello Team,I would like to understand the LAN automation process for installing a new switch in our network (real environment).Could you please provide a detailed step-by-step process from start to finish, including all the tasks that need to be comp...
Recommended Replacement for TMS
Hello,Looking to find out what is the recommended or preferred replacement for TMS. VQ Conference Manager or Synergy Sky Connect?
WS-C3750X-24P | c3750-advipservicesk9-mz.122-44.SE4
Hello FreindDoes this IOS "c3750-advipservicesk9-mz.122-44.SE4" works/Fits in this Box Model :WS-C3750X-24P "Thanks
7.3.6 Activity
Answer for the 7.3.6 Activity are completely wrong.
vPC on Nexus 9000
Is't ok on nexus 9000 i want to add command fast-convergence on vpc peer, also vpc peer has delay restore and auto-recovery, read some article fast-convergence heplfull vpc domain 1delay restore 150auto-recoveryfast-convergenceReduced recovery time ...
Resolved! Correct yang path with gnmic
Hi, I'm trying to use gnmic to gather some QFP stats on a Cisco C83000-1N1S-6T running IOS 17.12.04 I managed to fetch simple counters like: gnmic get --path '/interfaces/interface[name=GigabitEthernet0/0/0]/state' But I can't figure out the right pa...
UCSC-C220-M5SX Server - noisy fans and temperature not right
My server is showing in the cimc that the temperature is like a million Celsius … even tho it’s under cold conditions. I saw that updating the cimc will help so I updated it but still it’s not solved . What could be the issue?? And how can I solve it...
Continues Ping shows Dots
Hello Freindswhy i m getting the below Pings!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!.!!!!!.!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!!!.!!!...
Asr 9910 password recovery
Hi, this is Samet. I'm operating a Cisco ASR9910 in my office.We are using a tacacs server to management all user and password config for network devices. Our ASR can't accept any username and password. When i type command "dir" there is no partition...
| User | Helpful Count |
|---|---|
| 71 | |
| 53 | |
| 41 | |
| 36 | |
| 35 |
