Cisco Software training materials and resources for Enterprise Agreements, Smart licensing and Smart...
4789 PostsEngage with your peers and Cisco about enterprise-class technology tailored to small and medium-size...
231 PostsEngage with your peers and Cisco about collaboration products such as contact center, IP telephony, ...
217055 PostsConnect with other Cisco technology experts on topics of automation and programmability of Cisco pla...
28185 PostsProfessionals using or considering Cisco data center technologies can join the conversation to discu...
43789 PostsCollaborate with your peers and Cisco on all areas of IoT to discuss what happens when the internet ...
250 PostsCollaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Arc...
291360 PostsFind tools and resources to streamline your service and parts logistics questions, technical documen...
8417 PostsExplore the security forums and share your expertise about firewalls, email and web security, Identi...
203072 PostsExplore information and join discussions with peers and Cisco about Next-Generation Internet, MPLS, ...
17381 PostsInteract with peers and Cisco about Cisco Services including design, analytics, CSR and ServiceGrid,...
5625 PostsExplore what Cisco has to offer for your small business IT needs. Learn from your peers and Cisco ex...
42697 PostsConnect with peers and Cisco on all aspects of wireless tech including security and network manageme...
58490 PostsHave a look at upcoming events and register for one that interests you!
385 PostsHello FreindsAre there any things missed in the NTP server Below config? VMs has issue associating with this NTP ServerBelow NTP Config==============WS3750-X#sh run | sec ntpntp source Vlan64ntp master 5ntp server 172.16.100.254WS3750-X# 1 of the VM ...
Hello Freinds vNDO 4.1.1g get to the software image after dissociating from NTP for whatever reason, is there any methode to prevent it for NTP Check after the successful installation rescue-user@NDO-3:~$ acs health======Status======[critical] Node[...
While install BIDI SFP on Cisco 9407 R and get optical power reading we faced below issueDiagnostic Monitoring is not implemented
Hi to everyone I am new here.I know that the SG200-18 has been EOL for a while, but I recently purchased one in good condition and I would like to update the firmware to the laste version.Does anyone have the files including the boot loader to upgrad...
I know it's a very silly question to ask, but I want to know whenever we create a vlan with vlan vlan-num e.g. vlan 10and then till we don't use exit and came back to configuration mode the vlan doesn't show up. Like why we have to explicitly 'exit' ...
HelloIs there a way through the wireless contorller(5.2.178.0) to flash the light on a 1250 series lightweight AP that is managed by that controller?I have about 8 - 9 1250's that got deployed on a 30 foot high ceiling and didnt get their MACs docume...
I learned that MED is applied to outbound updates , dictating the best inbound traffic into the AS, but I saw the vice-versa is also true like you can apply med for indbound updates also and it works the same right??
I have enabled only SSH publickey authentication on the router, and disabled password and keyboard authentication. But Ansible is still able to authenticate on the router using a password.IOS: 15.5Linux: Ubuntu Server 22.04From a Linux VM I am not ab...
I have a Cisco switch c3850. I have recently updated its IOS. Now, I cannot set next variable boot so that the switch automatically boot from packages.conf in the next restart. I did set boot variable using this command "boot system flash:packages.co...
Dear Team,Facing two issues with our IP phones. Details are mentioned below:Issue 1: Call Drops After Few SecondsCalls are getting disconnected automatically after a few seconds of connection. This issue is happening frequently on both incoming and o...
Hi Dearsmost switches donnot support RSPAN IF port trunk on and port 2 is access vlan 200 Copy traffic SPAN on VLAN 200 ???
it has the alarm light at the front panel lighted and if we connect the computer to the console port after the boot period the followingh message appears: oob_net: reply timeoutcould someone tell me what is could the type of failure of the mcu ?**...
Hi,My single SG350X-48P will be replaced by a SG550X-48MP stacked with a SG550XG-8F8T.Is it possible to backup the configuration of the 350 and import it into the 550x-48MP after building up the hybrid-stack?What is the recommended way/steps to trans...
Hello ACI TAC TeamAny Plan to update the below to NDO 4.1.1ghttps://www.cisco.com/c/en/us/td/docs/dcn/whitepapers/cisco-multi-site-deployment-guide-for-aci-fabrics.html Thanks
We now have a 2900 voice gateway and need to migrate it to a CAT8300 voice gateway with SIP-ISDN integration.We have the following components listed My question is regarding the License for voice (SIP-ISDN), We have "DNA-C8300-SW." but I don't know i...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| User | Helpful Count |
|---|---|
| 59 | |
| 48 | |
| 46 | |
| 44 | |
| 34 |
| User | Count |
|---|---|
| 26 | |
| 18 | |
| 13 | |
| 11 | |
| 10 |