Activity in Technology and Support
Loop L2-Migration Legacy FabricPath to ACI
Need your help to solve this issue. I've read many manuals but no way out.I want to migrate a legacy network running with Cisco Nexus switches and FEXes to ACI Multi-Pod, VLAN by VLAN. For visualization, please see plan below. BD=EPG=VLAN connected ...
I have a question regarding the deployment of the ISE-PIC agent. Is it
Hi Dears, I have a question regarding the deployment of the ISE-PIC agent.Is it possible (and supported) to install the ISE-PIC agent on an intermediate Windows Server instead of directly on the Domain Controllers? If yes, can the communication betwe...
Prime infrastructure unable to upgrade 3.10.2 to 3.10.6
Hi, Can anyone point me in the direction as to why my Prime infra server wont upgrade from 3.10.2 to the latest 3.10.6,The GUI seems to think the updates are installed however under "about prime infrastructure" it still shows 3.10.2I have confirmed t...
Resolved! Update IOS
it's possible update ios from router to router cisco.scheme for clear understanding, from R3 send ios to R4
Catalyst Center - PoE vs non-PoE
Hi,It appears that Catalyst Center currently provides only Power-over-Ethernet (PoE) data.Are there any recommended approaches to obtain energy visibility for non-PoE devices?Thanks in advance!
Resolved! ISE 802.1x PEAP-EAP-TLS Auth with Entra ID ISE 3.5 Availability
We have recently Migrated from EAP-TLS to PEAP-EAP-TLS against Ad and Entra, AD side works awesome, but I know availability to be able to pull device/ user groups from Microsoft Entra is included in ISE 3.5. We have been patiently waiting, but was wo...
ISE upgrade 3.3 to 3.4 any problem
anybody have problems upgrading ISE upgrade 3.3 to 3.4 any problem
Issue in deploying Catalyst 9000 Always-On Sandbox -20251029T06335565
Hello team,I've been facing an issue with deploying the always on cisco catalyst 9000 Always-on it takes a lot of time and then it shows an error saying in the resource tab error no asset found on the cisco XR always on I face the same issue what can...
Cisco SDWAN vManage Memory Usage is more than 80%
Hi all,We receive a report showing that our vManage memory usage is more than 80% ( 82-83 %) everyday. We've opened TAC for that and they said vManage memory usage under 90% is normal condition.As we will be deploying many new branches sites, we conc...
Resolved! Collaboration 14 Sandbox
Hi I am not able to find this sandbox: https://devnetsandbox.cisco.com/DevNet/catalog/collab-14-sandbox anymore, any idea? Thanks, Victor
Sandbox Reservation Issues
MY environment that is stuck in a terminating state.SD-WAN 20.10-20251014T07142752. I cant force end nor extend.
Using Let's Encrypt Certificates with Cisco FirePower, ISE & IOS XE
Table of Contents Table of ContentsSummaryLet's EncryptTraditional Certificate ProcessInstalling CertbotLet's Encrypt RegistrationDomain Validation ProcessGenerating a CertificateUse Certbot to request a certificate for ravpn.ourdomain.netUse your ...
Force terminate an enviroment.
Hello,Can an admin force terminate environment BFXBevNxbIq0 in the Sandbox devnet please? It is stuck in a failing termination loop and I don't have the permission to force terminate it.Thanks
DMVPN Hub priorities
Hi AllI have configured a backup DMVPN hub in our environment (single cloud), I expect all the queries, nhrp redirects etc to come from the primary one as I have configured a lower priority on the backup one, hub 1 is default 0 and the backup is 100....
| User | Helpful Count |
|---|---|
| 93 | |
| 87 | |
| 64 | |
| 62 | |
| 61 |
