Activity in Technology and Support
client association to ap
Hi,I have 10 access points deployed on one floor, but most clients keep connecting to a single AP in one area. This causes connectivity problems and slow browsing, especially for new clients trying to join. How can I resolve this issue and ensure pro...
Resolved! Cisco NCS 540 Licensing
Hello, We have a core ISP network of Juniper routers and we are trying to do some POC and test MPLS features using Cisco NCS products and see interoperability with Junos with final goal to migrate everything to Cisco. We need to do a POC using N...
Resolved! pnpa service reset on Stack of 9300 switches configured with priority
Hi, Testing PNP Day 0 (PNP) and Day N Templates for stack of switches catalyst 9300. The first time we booted the stack (From factory default) PNP worked perfectly and the switch was provisioned with a Day 0 template from Catalyst Center. Then after...
FMC DHCP Server no lease
Hello Together,I configured on Cisco FMC 7.6 the DHCP Server for one Sub-Interface because we have to route this VLAN on the Firewall. I add the VLAN tag and configured the switch also for this Vlan. Problem is I cannot get a lease. I saw on Cisco IS...
QoS in MPLS VPN
Hi,I have some MPLS VPN PE routers. I enabled marking on the LAN ingress interface and shaping on the WAN egress interface that is MPLS enabled.But marked ingress packets do not match on egress MPLS interface.What should I do?
How to get Cisco Secure Access Best Practice Guide
The following resources are available on the Cisco Security Webinar website:SASE Latest Update - Success Points and Latest Features Learned from Case Studies -https://www.cisco.com/c/dam/m/ja_jp/training-events/events-webinars/security/2025-may-21-sa...
Resolved! Device Not Accessible // Please Help
Hi Phone Pros, I have a quite unusual issue. I have a problematic phone in which certain call center users cant log into on Finesse. Lets say for instance Kristy can log into any phone and workstation through Finesse however, on one specific workstat...
Configuring C1131X-8PLTE-PW AP controller
I am not able to setup wifi on a brand new C1131X-8PLTE-PW. Obviously there is no default username/password to acces the AP controller via the webgui. Connecting via default SSID CiscoAirProvision-BCB8 works, but then I do not get answer when trying...
Does any FPR devices support FCM setup as long as they using FXOS?
Hello, I just need confirmation on the FCM setup. Is it doable to be configured on the FPR3105 and FPR4215?. Most of the FCM setup documentation only for 4100/9300 series and did not mention on the series Im looking above. Thanks!
Access point not showing up under inventory in catalyst DNA center
I am syncing sites and devices between Cisco prime and DNA center. I have a particular site map and access points that have migrated over with the exception of one AP. Oddly enough, this AP does show does show up and registered to the wireless contro...
cisco C9500-24Y4C stackwise virtual
Hi,I have two Cisco C9500-24Y4C switches in a StackWise Virtual configuration. We are currently using 40-Gig ports for the SVL, and I need to change the SVL link ports to 10-Gig interfaces. How can I make this change with minimal traffic disruption?
Compliance - Critical Security Advisories
Hi folks,I'm trying to stop switches being highlighted as having a critical vulnerability by using the Configuration Match Pattern. Am I right in thinking that if a vulnerability doesn't apply to a switch because the configuration isn't on the switc...
Cisco ISE 3.3 patch-7 and Microsoft Active Directory Integration
I have an ISE cluster 3.3 patch-7 with a PAN/PMnT, 2xPSN in Data Center A, and SAN/SMnT, 1xPSN in the Data Center B. We have six ADs, with 3xADs in each Data Center. There is a 45ms latency When I go into the External Identity Sources, I noticed th...
Cisco ISR 1100 Remote Access VPN
Hello,I have Cisco C1121-4P Router with Sec9 License, I need to configure Remote Access VPN - like Anyconnect, is it possible?
Cisco UCCX pilot singal
Greetings, colleagues!There is Cisco Unified CCX 12.5It has a simple ivr script set up, everything works with dialing and the operator, but users complain that after dialing the number or transferring the call to the operator, there is silence until ...
| User | Helpful Count |
|---|---|
| 68 | |
| 44 | |
| 41 | |
| 34 | |
| 31 |
