Activity in Technology and Support
Cisco 7811 Web GUİ
Hello, I have a Cisco 7811 phone and I want to access its web interface. I have the software version sip78xx.11-7-1-17.loads and I installed it, but the web interface still doesn't work. What could be the problem? Thank you.
CML 2.6.1 not displaying the IP Address to access the User Interface
Hi,At the VMware Workstation 17 player Virtual Machine Network Adapter settings, wether I used Bridged Mode or NAT Mode, the Cisco Modelling Lab 2.6.1+Build 11 is not displaying the ip address to access the CML User Interface. Please kindly help me o...
Resolved! SNMP query for Cisco WLC and AP
Query - When we configure the SNMP in the WLC, does that config gets pushed to the APs?
UCCX - Remote hosted gadget?
I'm very curious if UCCX allows gadgets to be hosted remotely. I've always had to punt because it doesn't "just work" like it does in UCCE, so I've just assumed that it's hamstrung in this regard. But - can it? Can I use a tag like this (assuming the...
Access to free Catalyst updates?
Hi, i'm looking into buying a Cisco Catalyst 1200 switch and the product page says:"With Cisco Catalyst 1200 and 1300/X Series switches, there is no license to purchase, and software updates are available at no additional cost. The switches offer a l...
Cisco 3750X stuck in ROMMON– Flash errors, USB not detected, boot fail
Hello Cisco Community,I am troubleshooting a Cisco Catalyst 3750X (WS-C3750X-48PF-L) that is stuck in ROMMON mode and fails to boot IOS.Current state:The switch stops at the "switch:" prompt and does not boot automatically.Observed behavior: dir flas...
I configured eWC on my C9120AXI but encountered a problem where the Ac
I configured eWC on my C9120AXI but encountered a problem where the Access Point sometimes joins and sometimes doesn't. Jan 17 14:42:15.989: %SYS-5-CONFIG_P: Configured programmatically by process SEP_webui_wsma_http from console as admin on vty0 J...
bluetooth on smart phone
Hello,I'm using the cisco app on my google pixel 6a and when i try to make a call on cisco app only, my airpod are not connected and the call is redirected to the phone or speaker. My calls always go to my bluetooth devise when i am on my phone app. ...
Whitelisted IP in dACL not Reachable
I have an FPR-2130 that I use for VPN anyconnect. I also use ISE with it, I have a user that connects to the vpn, and then there is a specific dACL that gets applied to their session. I have some ips that are permitted in th dACL, but user can’t reac...
Questions about WLC 9800 in DR (Redundancy) site - VLAN best practices
Dear all,We are designing a new site for redundancy in the customer's environment, and it has shared the same networks and VLANs as the production environment.The networks will not communicate because we won't have VLAN extensions. However, I think t...
Resolved! Server load balancing onto itself
hiI have a customer with 4710 that load balances inbound traffic onto 2 servers. this worksThere is also a requirement for the servers that are load balnced to [what seems to me ] to load balance onto themselves and for other server on the same vlan ...
Import master CSV file with parameter values failing
Hi, Any help with the following? I have Catalyst Center configured with Composite Templates for Day N Deployment. Each regular template inside the composite template have variables configured. Due to the high number of switches to be deployed, there...
9800 - Configuration in Network Parameters different in RF Profile?
Hi all, I just want to clarify this for myself and couldn't find any good explanation on this.Within the 9800 WLC we can configure Data Rates on a band via: - Configuration -> Radio Configurations -> Network -> 6 GHz, 5 GHz and 2.4 GHz.or- Configurat...
Max retransmission count exceeded, going back to DISCOVER modeについて
お世話になっております。 WLC17.15.2（APはC9166）で以下のログを出力後、帰属が外れる事象が発生しております。Max retransmission count exceeded, going back to DISCOVER mode.保守に加入していないため、TACへは問い合わせ出来ません。同じ事象が発生している・解決された方いらっしゃいましたら、ご連絡いただけますか。 よろしくお願いいたします。
USB Not found in For IOS Update
Hello Community I am facing some issue in my Cisco Catalyst c9200L-48P-4X some time the Switch is booting is normal way and turning to again reload switch: Mode I would like to rest the IOS and upload new one but USB is not finding in OS even ...
| User | Helpful Count |
|---|---|
| 107 | |
| 68 | |
| 52 | |
| 50 | |
| 29 |
