Hi Guys, I will be using IW9167 in UWRB mode for an AGV use case but I am stuck what external antenna to use. I will be placing my AP at the metal column about 6 to 7 meters from floor. Not sure which antenna is best either omnidirectional or directi...
Afternoon everyone, I'm trying to connect to an APIC using PyATS and the rest.connector.Rest method, but no matter what, I get authentication failures. Here is my testbed file:devices: apic: os: apic type: apic custom: abs...
Hi, I am trying to understand if it is possible to use Cisco Umbrella DNS to inject a custom header into requests. Just to clarify we are not using Cisco SIG. Thanks, John
Hi Guys,Currently we are using 4 standalone C3650-24PS switches in the production network. Planning to configure these 4 switches into stack. Can anyone please tell me what the precautions are to be taken while configuring the stack.I mean any change...
1Gb catalyst switches has air intake from front and side and exhaust to the back. And no versions with reverse-airflow.I know many places where such switches installed port side to the hot corridor - so it intake hot air and blow to direction of col...
Hello,We are having ISE for EAP/TACACS authentication and, hosted internally in our datacenter.Now we have configured BYOD captive portal that tied to AZURE SAML authentication, the current captive portal redirect URL from ISE has prepended the node ...
H All, I seem to have hit bug - CSCus56895 which gives me a non defined IMS exception error message when logging into the new 12.5 cluster. The bug fix states to "copy CCMEncryption key files from Source Node to Destination Node. would need RemoteAcc...
Hi All,I am geting below alert while configuring ELAM on ACI leaf switch.Can any one suggest on this.module-1# debug platform internal tah elam asic 0Invalid CLI for platform type - TAHalso can some one share the procedure to perform the ELAM capture...
Hi!I made converted an 2702i from light to autonomous, changing the image to the version: flash:/ap3g2-k9w7-mx.153-3.JC/ap3g2-k9w7-xx.153-3.JCThis image have web interface very unstable (we need to apply many times the configuration to save) and rece...
The following message is displayed when the connection button is pressed. Please tell me how to solve it. Certificate Validation Failure AnyConnect VPI version 5.0.04232 Secure Client UI version 5.0.00889 Certificate Expiration Date 2025/4/3
Hello,I need your help - currently we have a 2921 Cisco router connected to dual ISPs using "gi0/0 & gi0/1" and we are able to connect to either ISP successfully. Once we connect gi0/2 to any device the connected switch is not able to access the in...
On which case we can say there is high interface utilisation Either case 1 when transmit percentage is high Case 2 when Received percentage is high Or Both should high
Hi, I am working on a RFP where one of the specs says " the switch should support IEEE802.3ah ethernet link OAM and IEEE 802.1ag/ITU-T Y.1731" this is the only point which i am not able to find a reference in cisco documents, though we have a cisco 9...
