Activity in Technology and Support
Missing connection logs
Hello,I've successfully configured an external syslog server on FDM, and it's receiving messages correctly. I've set the Default Action Block to send syslog messages, and those are arriving as expected on the external server (among other messages).Ho...
FlexConnect user disconnected after the AP disjoined the WLC
Hello Expert , As per my understanding the FlexConnect with central auth and local switch , will keep the clients "thats already authenticated" connected , however i had the situation where already authenticated users were disconnected from AP when A...
Effective Solutions for Cisco Network Device Configuration Backups
Hello everyone,We have many Cisco 2960 and Cisco 9200 switches. When backing up their configurations via FTP to a file server, every time we make a change and issue the write memory command, a new backup file is created — because the backup process a...
Resolved! C8000v Azure BYOL licensing
Good Day All, I am looking to order a C8000v license to be used with the BYOL package in Azure. However, I can only seem to find : L-DNA-C8000V SKU in Cisco CCW. Inside that SKU, it does stipulate DNA licenses for Cloud, but I am worried this may be ...
Some ports on C9200 Switch not passing traffic
We have a C9200L-48P-4X deployed. All of the gigabit ethernet interfaces are on one vlan. Most of the interfaces pass traffic just fine but there are at least 4 interfaces (that we know of) that don't pass traffic. All of the interfaces are configure...
Resolved! Taildrop avoidance for critical traffic
Hello Experts , I have a critical application traffic which passing though my Cisco ISR 4321 and i noticed that some packets being dropped as Taildrop , Please find below output from packet-trace debug : sh platform packet-trace summary | i Gi0/0/...
CBW 150ax compatibility with cisco c9105 AP
Hi team,We are using cisco business Ap 150ax in our infra and now some new 9105 APs we want to add.We know CBW do not support EWC controller. Is there any chance 9105 (in AP mode) can be used with CBW 150ax AP.Please help.
DBS 210 DECT base Upgrade firmware from 4.5
I have a couple of DBS 210 bases (new) that have v4.5 on them. I will be using them on CUCM. I understand that I need to update them in stages until the latest version, but the documentation says I need to go to v4.6 before going to 4.8 and then on t...
Intrusion Policy used before Access Control rule is determined
I’m experiencing latency issues with my internet service. I've identified that the setting "Intrusion Policy used before Access Control rule is determined" is enabled under the Advanced Settings of my APCs. My firewall is currently handling around 18...
CX cloud and meraki
I have another cx cloud question, in regards to meraki dashboards. I did read over the meraki article on how to integrate, seems simple enough with only one org. There are many companies under the umbrella now, and i am an admin in multiple orgs now....
ISE TrustSec AAA Servers
Hello, I have one AAA TrustSec server defined in ISE. However, when i try to remove it I get the error "Failed to delete AAA Server"I am using TrustSec and i suspect this was used for testing. Anyone know how i can remove this server?I think thi...
Possible to Use FTD as DHCP Server with multiple DNS servers
I'm in a situation where I need to use the FTD as the dhcp server for both my guest and internal subnet. At present I have it configured to give out my internal domain and dns servers. Can I use a FlexConfig configuration to modify the dns settings...
Resolved! Cisco ATA191 and Door Intercom. No Audio and no latch opening.
Swapping a new client from an old voip system to a new voip phone system. Factory reset their Polycoms and they all picked up the new config no problems. The Door intercom Cisco SPA112 did not though. Network support told us to power cycle, factory r...
Backup to a different NFS servers.
Hello,I am planning to migrate my backup servers to AWS.I already have an sftp service set up.If I create a separate NFS service via Storage Gateway, will the backups work? Or does Cat.Center require the backups to be backed up on the same destinatio...
Cisco FTD HA Peer Failed
Dear Team, We have both FTD 1120 Firewall. Between them HA peer configured. But for some reason we re image the standby firewall. Break the HA on primary firewall for rejoining standby firewall on HA.But after deploy HA on standby device HA Peer fail...
| User | Helpful Count |
|---|---|
| 84 | |
| 76 | |
| 64 | |
| 63 | |
| 61 |
