Hello,How we can make EEM Script to backup startup config to the SCP server with 2 condition :Backup when we issue write memory commandBackup weekly every sunday @10PM
Hello Experts,My Callback script is working as expected. The only issue is that the CUIC report shows the Callback as an abundant call. Is this a normal behaviour or I am mising some configurations? TEST_2iem_Chance_Fr is the main queue where the cal...
Hi Everyone,I would greatly appreciate your help, the log in a cisco Nexus9000 C9336C-FX2 Chassis is showing high temperature in three ports Ethernet1/34, Ethernet1/35, Ethernet1/36:2024 Sep 20 15:29:38 %ETHPORT-4-IF_XCVR_WARNING: Interface Ethernet...
Has anyone figured out a way to initiate a directory sync other than via the sync now button or system scheduled 10am sync time? I’d like to kick off a sync automatically at a time other than set time of 10am in the DUO admin panel, which I can’t c...
Hi, we have implemented EAP-FAST with machine (eap-tls) and user authentication (MSCHAP). Secure client 5.0.05040. Everything works fine but one user is reporting that sometimes when he logs in, the secure client shows him error: An authentication er...
Hi there,We're evaluating the new 9800 series phones on 3pcc (non cisco call control or server). One issue we've discovered with the MPP firmware is that "Programmable Softkey" (PSK) xml functions no longer seem to work on this series even though the...
Hi all,CUCM 11.5.1.12900-21Rocky Linux 9.4, OpenSSH_8.7p1, OpenSSL 3.0.7 1I am attempting to set the Rocky server as a backup device for CUCM. I initially got the errors regarding key exchange algorithms and host key types not matching, so I enabled...
HiI have a Cisco SG300 Switch which I'd like to monitor using CheckMK or really any software.Checkmk successfully received the following things:- Anything about network interfaces- Uptime- System Information- Port Status- POE WattageHowever I'm still...
I have C5508 controller with code 8.3.150.0 hosting ~280 APs with different models ( LAP1142N, AP1832I, CAP1702I etc) and yesterday for unknown reason several APs were missing ( de-associated ) from WLC. no TAC support and no time, reloaded the WLC a...
Hello, I am working with a CBS350 series switch that is up to date on the latest firmware. I am trying to enable the CBD probe to check into the dashboard, which was also recently updated to the latest version. I run through all the steps as provided...
On a switch-to-switch interface, can we configure both of these commands at the same time, or can we only configure one of them?switchport mode trunkswitchport trunk allowed vlan allinterface GigabitEthernet1/1/3description ****Uplink-Block-Switchswi...
Dear Teami currently working in ISP . we face issue when we test speedtest on 2.4Ghz wireless wifi or ONU unable to get upto 50mbps speed . But some ISP . i think using concept of TCP optimization to improve speed . so can any help How to implement T...
HiMy name is Josip and I am a student.I am currently working on a project about use of AI in computer networks.I finished teorietical part, but i did not found any real-world examples on the internet about using AI in network security.I wonder if som...
I have two Secure Firewalls (running ASA code) in a active/standby failover. Failover is working. These intefaces are present: E1/5.100 -> Management VLANPort-Channel1.50 -> Transit Network VLAN to core switchPort-Channel2.150 -> WAN1 VLAN, to a swit...